xboxscene.org forums

Pages: [1] 2 3 ... 8

Author Topic: The Final Tutorial For St.db Audio Exploit  (Read 857 times)

AZNracerx1989

  • Archived User
  • Newbie
  • *
  • Posts: 7
The Final Tutorial For St.db Audio Exploit
« on: August 02, 2004, 08:34:00 PM »
i just tried this on my modded xbox with the modchip turned off... i have krnl 5101 i think and it works perfectly.... sign habibi key use that program provided in the tutorials sticky in this forum.... after it boots be sure to take out the audio cd right away or else it will try to get back to the ms dashboard
Logged

busbeepbeep

  • Archived User
  • Newbie
  • *
  • Posts: 13
The Final Tutorial For St.db Audio Exploit
« Reply #1 on: August 03, 2004, 11:19:00 AM »
blink.gif
Logged

rossmac

  • Archived User
  • Jr. Member
  • *
  • Posts: 66
The Final Tutorial For St.db Audio Exploit
« Reply #2 on: August 03, 2004, 11:24:00 AM »
why would you even bother with a audio exploit? - UDE is simply the best you can use - by bringing up this year old thread - u might be confusing new people to the exploit scene on what to use,   so again - Use the UDE/UDE2
Logged

lp2000

  • Archived User
  • Newbie
  • *
  • Posts: 18
The Final Tutorial For St.db Audio Exploit
« Reply #3 on: July 07, 2003, 12:00:00 PM »
NOTE the exploit ST.DB is seperate from the font exploits.. I didn't mention about the font exploits in the tutorial. so dont use the font exploits.. only the audio exploit!

Firstly you must do this.. thanks to Adso58 for figuring the out the problem of the audio exploit ONLY running linux.xbe

Adso58 did this first:
"I managed to get the audio exploit to run whatever .xbe, I explain it:

First you must install the exploit without any change, insert a Audio CD, execute linux.xbe, etc.

Now, you need to transfer the ST.DB that you have copied to the XBox before, to the PC (the file should have changed).

With this file, replace the following bytes (starting at position 0xFF):

"05 14 00 00 00 89 85 72 01 00 00"

with these

"81 76 FF 14 01 00 10 90 90 90 90"

Copy this modified file to the XBox (yes, again), and overwrite the old file.

Now, you can sign any .xbe with the habibi key using "xbedump file.xbe -habibi" and copy out.xbe as linux.xbe in E: and the .xbe will run.

And I must recognize that the guy that made the audio exploit is very clever, he put some nice protections to avoid running other .xbe than linux.xbe

This method was tested on a XBox v1.0, with kernel 4034 and dashboard 4920, I don't know if it will work in other XBoxes"

A Big THANKS to Adso58 yet again.

Tutorial:

For the Following Methods you need:
1)The Audio Exploit
2)Either 007, mech assault save hacks
3)Either A Copy Of EvoX or !Loader v1.0 FX (which ever one you choose)

-----------------------------------------------------------------------------

How to make the Audio Exploit work for Evo X

now.. to do this .. its REALLY easy..

step one:
find a way to communicate with your xbox (i.e. like the 007, mech assault saves already loaded with evo x)

step two:
now since you have your network setup with the box and the pc all you need now is a copy of the audio exploit (for more information about where to put the audio exploit read the readme file that came with it... it will tell you where to put it).. put the ST.DB on the xbox WITHOUT the linux.xbe file in the E partition (this will be explained later)

step three:
get a copy of xbe dump (i will assume that you would already know how to use this software) and put the command line:

xbedump default.xbe -audio

(the default.xbe file that you will be using will be the evo x .xbe file)

when that is done the default.xbe file will be named again as out.xbe .. rename out.xbe into linux.xbe.

step four:
now take the "new" linux.xbe file and put it in the E partition also add all the files evo x came with (as linux.xbe as its excutable).

step five:
reboot your xbox and load up the audio exploit.. voila.. evo x for your unmodded box!

p.s : i got LOADER.v1.00-FX.XBOX-COMPLEX working with this exploit too.. i will be posting it later.. since its the morning and i have stuff to do.

dont flame me if you get this shit all wrong.. FOLLOW the instructions.. if your stuck.. read the read me files and such.. oh yes make sure you know how to use dos for the xbe dump prog.

-----------------------------------------------------------------------------

How to get LOADER v.1.0 FX to work with the audio exploit.

now.. to do this .. its REALLY easy..

step one:
find a way to communicate with your xbox (i.e. like the 007, mech assault saves already loaded with evo x)

step two:
now since you have your network setup with the box and the pc all you need now is a copy of the audio exploit (for more information about where to put the audio exploit read the readme file that came with it... it will tell you where to put it) put ST.DB on the xbox WITHOUT the linux.xbe file in the E partition (this will be explained later)

step three:
get a copy of xbe dump (i will assume that you would already know how to use this software) and put the command line:

xbedump default.xbe -audio

(the default.xbe file that you will be using will be the !Loader v.1.0 FX .xbe file)

when that is done the default.xbe file will be named again as out.xbe .. rename out.xbe into linux.xbe.

step four:
now take the "new" linux.xbe file and put it in the E partition
DO NOT put the !Loader Folder in the E partition (this will be explained later) ONLY put the new linux.xbe file in the e partition.

step five:
put the !Loader folder (with all of its contents) to the C partition

step six:
reboot your xbox and do the exploit.. you will see the loader load! YAY.

the good thing about the audio exploit is that it doesnt "auto load" evo x or even the loader.. you can manually enable it yourself with the exploit.

dont flame me if you get this shit all wrong.. FOLLOW the instructions.. if your stuck.. read the read me files and such.. oh yes make sure you know how to use dos for the xbe dump prog.

This post has been edited by lp2000: Aug 14 2003, 06:50 AM
Logged

{later}

  • Archived User
  • Full Member
  • *
  • Posts: 135
The Final Tutorial For St.db Audio Exploit
« Reply #4 on: July 07, 2003, 12:21:00 PM »
Where can I download that modified xbedump.exe where I can use the -audio command?

Also do I have to upgrade my dashboard for this trick. I have a 3 options dashboard now.

This post has been edited by {later}: Jul 7 2003, 07:21 PM
Logged

Jubba

  • Archived User
  • Newbie
  • *
  • Posts: 8
The Final Tutorial For St.db Audio Exploit
« Reply #5 on: July 07, 2003, 12:37:00 PM »
***DO NOT REQUEST***

This post has been edited by LepPpeR: Jul 29 2003, 01:44 AM
Logged

eug2k

  • Archived User
  • Full Member
  • *
  • Posts: 172
The Final Tutorial For St.db Audio Exploit
« Reply #6 on: July 07, 2003, 12:43:00 PM »
for fucks sake go to #xbins on efnet!

This post has been edited by eug2k: Jul 7 2003, 07:43 PM
Logged

{later}

  • Archived User
  • Full Member
  • *
  • Posts: 135
The Final Tutorial For St.db Audio Exploit
« Reply #7 on: July 07, 2003, 12:44:00 PM »
It's not fucking there, only the -font xbedump...
Logged

joni swinga

  • Archived User
  • Newbie
  • *
  • Posts: 11
The Final Tutorial For St.db Audio Exploit
« Reply #8 on: July 07, 2003, 12:48:00 PM »
when i load ST.DB into the music folder
evox files and newly signed (with audio key) default.xbe (renamed to linux.xbe) in E root. put in a cd and boot the file i get dashboard error 21. any ideas

p.s. when i put the original linux.xbe that came with the exploit in e root it boots linux fine.

but i want evox to boot :(
Logged

eug2k

  • Archived User
  • Full Member
  • *
  • Posts: 172
The Final Tutorial For St.db Audio Exploit
« Reply #9 on: July 07, 2003, 12:50:00 PM »
ummm its the same damn program
to sign things for the font exploit type xbedump default.xbe -font
to sign things for the audio exploit type xbedump default.xbe -audio
Logged

Jubba

  • Archived User
  • Newbie
  • *
  • Posts: 8
The Final Tutorial For St.db Audio Exploit
« Reply #10 on: July 07, 2003, 12:55:00 PM »
:angry: I checked xbins before postin
Logged

eug2k

  • Archived User
  • Full Member
  • *
  • Posts: 172
The Final Tutorial For St.db Audio Exploit
« Reply #11 on: July 07, 2003, 12:55:00 PM »
im telling u its there u just have to find it!
Logged

lethalfrog

  • Archived User
  • Newbie
  • *
  • Posts: 9
The Final Tutorial For St.db Audio Exploit
« Reply #12 on: July 07, 2003, 12:59:00 PM »
joni swinga,

I believe that your problem is the same as mine.  The audio hack in xbedump surely is the free-x wav hack not the st.db one.

I have signed the files correctly get OK and all I get is 21.  I have sucessfully got evox running using the mech assault hack and the habibi keys so I am sure it is not my process.

Logged

eug2k

  • Archived User
  • Full Member
  • *
  • Posts: 172
The Final Tutorial For St.db Audio Exploit
« Reply #13 on: July 07, 2003, 01:02:00 PM »
free-x wav hack?!?!
Logged

lethalfrog

  • Archived User
  • Newbie
  • *
  • Posts: 9
The Final Tutorial For St.db Audio Exploit
« Reply #14 on: July 07, 2003, 01:05:00 PM »
The wav files in the dashboard are also vunerable to the same exploit as the fonts.
Logged
Pages: [1] 2 3 ... 8
« previous next »