Print

[inc188]

hi there

just a quick question/ point me in the right direction.

I got :

Splinter Cell
Xbox
Home Made USB cable

and now what?

what is the best tutorial to follow to get'er done?

i have been reading (http://www.se7ensins.com/forums/xbox-tutorials/20179-softmod-krayzies-ndure-installer-1-1-1-a.html) but it seems like he is using AR to do this and i am not sure if i can follow his tutorial with a home made usb cable???

thank you

ps. i have also donwloaded XMBC live? is that correct? thanks

[obcd]

Find the usual places. Get the xplorer360 program. Find an usb compatible memory device (one that is recognised by the M$dash for gamesaves.) Let the M$dash format the usb stick, and store a gamesave on it as a test.

Plug the stick in your pc and acces it with the xplorer360 (yes it also works for xbox1 devices) Copy the Krazy ndure gamesave exploit on the stick with it.

Copy the gamesave exploit to the xbox harddisk. Run the game and select the gamesave exploit.

Action Replay is just another way to connect a xbox gamesave device to the pc. So, once you have the exploit on the gamesave device, you can follow the tutorial.

regards.

[inc188]

QUOTE(obcd @ Nov 5 2009, 09:58 AM)

Find the usual places. Get the xplorer360 program. Find an usb compatible memory device (one that is recognised by the M$dash for gamesaves.) Let the M$dash format the usb stick, and store a gamesave on it as a test.

Plug the stick in your pc and acces it with the xplorer360 (yes it also works for xbox1 devices) Copy the Krazy ndure gamesave exploit on the stick with it.

Copy the gamesave exploit to the xbox harddisk. Run the game and select the gamesave exploit.

Action Replay is just another way to connect a xbox gamesave device to the pc. So, once you have the exploit on the gamesave device, you can follow the tutorial.

regards.

thank you

everytime i plug in the homemade usb cable with a kingston 2gb memory card and i go to the memory section of dashboard, the screen starts to blink and make beeping sounds. the little bulb on the memory card starts flashing as well.... any suggestions to what to do?

[obcd]

1. My guess would be that your selfmade USB cable isn't properly connected. There isn't really a color standard for those cables. So, with some brand, connecting the identical colors might work, but with another brand of usb cable, it might not.

The 2 outer pin's of the USB stick are VCC (5V) and GND. The 2 inner ones are D+ and D- If you switch the 2 D wires, it won't harm. It simply won't work. Just be carefull with those VCC and GND wires. (If you reverse them you wil very likely kill your USB stick.)

Also be carefull if you try to measure on the pins of an usb connector. The shell is GND as well, and you don't want to short it with the VCC.

regards.