xboxscene.org forums

Pages: [1] 2 3

Author Topic: Unable To Get Splinter Cell To Load Anything  (Read 260 times)

foldor

  • Archived User
  • Newbie
  • *
  • Posts: 19
Unable To Get Splinter Cell To Load Anything
« on: June 22, 2006, 03:40:00 PM »

I am currently using an AR to transfer Krayzie's Splinter Cell Ndure installer v1.1 and I am having problems. My Xbox is a version 1.6, and I am using a copy of Splinter Cell that is a very early release. When I try to load the installer I just get a black screen. I have heard that Ar tends to corrupt bigger files, so I tried loading a smaller exploit so that I could transfer the files over the netwrok, but that also didn't work. This time it just foze at the profile screen. Does anyone have any ideas that may help me out please? Preferably if possible I would prefer to not have mod any controllers for a USB stick to work, and would not like to purchase a new memory card. However any ideas will be greatly appreciated.

Thanks in advance,
Foldor
Logged

JustXploit

  • Archived User
  • Newbie
  • *
  • Posts: 23
Unable To Get Splinter Cell To Load Anything
« Reply #1 on: June 24, 2006, 08:45:00 AM »

I did myn diz way...

AR w/ Evox_SC
got FTP > sent KRZY NDURE ...
DOne with sofmod.... Installed XBMC with dual boot!!!  muhaha.gif
Logged

foldor

  • Archived User
  • Newbie
  • *
  • Posts: 19
Unable To Get Splinter Cell To Load Anything
« Reply #2 on: June 24, 2006, 09:26:00 AM »

do you mean this file, splinter_cell_exploit-ntsc? If so I've tried it to and it doesn't work, it just gives me an error 21 screen.

Thanks anyways,
Foldor
Logged

Marz350

  • Archived User
  • Newbie
  • *
  • Posts: 1
Unable To Get Splinter Cell To Load Anything
« Reply #3 on: June 26, 2006, 02:49:00 AM »

I suggest you follow this tutorial, very easy & detailed.

http://www.techfreak...s/modxbox.shtml
Logged

methodus

  • Archived User
  • Newbie
  • *
  • Posts: 7
Unable To Get Splinter Cell To Load Anything
« Reply #4 on: June 26, 2006, 09:33:00 AM »

Had this problem to. Turned out both of the saves were not on my card so when the exploit tried to load the linux installer it couldn't find it and I would get the black screen.

In the AR software I had only transfered the Splinter Cell save over. Look at the top of the list of saves in AR and you should see the Linux Installer. Transfer that to the mem card and then retry the install. This is what I mean....
IPB Image

btw Krayzie's ndure 1.1 is a safer installer to use so I would stick with that.
Logged

foldor

  • Archived User
  • Newbie
  • *
  • Posts: 19
Unable To Get Splinter Cell To Load Anything
« Reply #5 on: June 27, 2006, 02:19:00 PM »

Thnaks for the tips, but unfortunately I have read many guides, and followed their instructions and still have not got my Splinter Cell to load anything. Also I do use both save files. The only thing I can think of that may make it do this is my Action Replay is messing up the save files.

I've decided to make a USB cable to transfer the saves over via my USB flash drive. But I'll still take any ideas anyone has on making the Action Replay work I would be happy to know because I'm not sure if my Flash drive will work because it's not on the list.

Thanks again,
Foldor
Logged

chorizo1

  • Archived User
  • Hero Member
  • *
  • Posts: 2302
Unable To Get Splinter Cell To Load Anything
« Reply #6 on: June 27, 2006, 02:50:00 PM »

Get an Official M$ memory card. (i'm guessing you are using the one that came w/ the package.)

The problem is not the Action Replay program,  it's the Memory card that comes with AR
Logged

foldor

  • Archived User
  • Newbie
  • *
  • Posts: 19
Unable To Get Splinter Cell To Load Anything
« Reply #7 on: June 27, 2006, 02:59:00 PM »

Yeah I was going to get one, only problem is that my budget is kind of tight right now and most stores have eliminated Xbox memory cards to make room for 360 accessories. Also the Action Replay reader won't read any other memory card and I don't have access to a friends modded Xbox.

Thanks anyways,
Foldor
Logged

methodus

  • Archived User
  • Newbie
  • *
  • Posts: 7
Unable To Get Splinter Cell To Load Anything
« Reply #8 on: June 27, 2006, 06:15:00 PM »

The AR software will read whatever is plugged into the xbox controller memory slot with the correct drivers. So are you using the actual Action Replay or just the software w/ a usb/controller mod? This may sound stupid but did you transfer the saves over to the xbox hd? In other words your not trying to load from the card...some people forget to do that.
Logged

boxecutioner

  • Archived User
  • Newbie
  • *
  • Posts: 30
Unable To Get Splinter Cell To Load Anything
« Reply #9 on: June 28, 2006, 03:07:00 AM »

Also pay attention to the MS dash when you copy the saves to the hd, as it will tell if the save is corrupt or not. Cuts out all the guess work biggrin.gif
Logged

foldor

  • Archived User
  • Newbie
  • *
  • Posts: 19
Unable To Get Splinter Cell To Load Anything
« Reply #10 on: June 28, 2006, 08:56:00 AM »

Ok, well I am using an offical Action Replay Memory Card in its little USB dongle thingy. I transfer the saves ver to the Xbox's HDD, and it doesn't tell me they are corrupted.

Is it actually possible that this version of Splinter Cell isn't explotiable? I mean I have always heard that so far every version works, and this is a really early version so it should of course work, but everything points to it being a dud. I'm not saying the exploit was fixed, it's just possible that this disc is broken.

Just another thing incase your to lazy to read previous posts, I tried Krayzies Ndure 1.1 installer, and got a black screen. Then I tried a smaller file that just has EvoX and got an error 21. Both files were taken from Xbins and both were transferred from the memory card onto the Xbox HDD. I also remembered to use both the Linux installer and the Linux profile files.

Anyways, if anyone else has any ideas I would be glad to hear from you,
Foldor
Logged

JustXploit

  • Archived User
  • Newbie
  • *
  • Posts: 23
Unable To Get Splinter Cell To Load Anything
« Reply #11 on: June 28, 2006, 09:37:00 AM »

Donot buy M$ card, Sure it works , but AR card does the same work too, with more effort....
Chorizo is wrong. AR cards do work. That's how I did myn.

1) Download splinter_cell_exploit-ntsc
2) Xtract > Goto UDATA , Take one of the folders...
3)Add datelinfo.xbx into the 5553000c folder (X:\Udata\5553000c\datelinfo.xbx)
4) zip up the file
3) Delete the extracted folders but  not the 21585554 folder.
4)Create Folder named UDATA ... paste the previous(above) FOLDER .... Then copy Datelinfo.xbx into that folder.
5) ZIp it ... Send both the zips to AR card.
6)U will get Evox.... So this way u get FTP access ... Almost COMPLETE, send KRZY ndure .. install . done

HUh HUH (IMG:style_emoticons/default/sleeping.gif)

Be sure 2 reply ... once this gets 2 work.

This post has been edited by JustXploit: Jun 28 2006, 04:43 PM
Logged

chorizo1

  • Archived User
  • Hero Member
  • *
  • Posts: 2302
Unable To Get Splinter Cell To Load Anything
« Reply #12 on: June 28, 2006, 12:19:00 PM »

QUOTE(JustXploit @ Jun 28 2006, 10:08 AM) View Post


Chorizo is wrong. AR cards do work. That's how I did myn.




I didn't say they DIDN'T WORK, They are just Buggy as Shit.

All you did was use a small package to Gain FTP acces and send it over, you read the READ ME. congrats.

The M$ cards can handle having the whole package on the card, It's alot easier than sending a small package, then FTPing the ndure over and running it.

NOTE this is from README.txt in Krayzies packages:

The save(s) come zipped up for direct use on Action Replay devices. If you don't use Action replay you need to unzip the save
first.
Note that many Action Replay cards corrupt large saves which results in a black or error 21 screen. Solution could be to use
a small gamesave exploit to grant access to the hd and copy this save to the E:\UDATA folder via ftp, Or use another memory
card.
Logged

foldor

  • Archived User
  • Newbie
  • *
  • Posts: 19
Unable To Get Splinter Cell To Load Anything
« Reply #13 on: June 28, 2006, 08:33:00 PM »

I'm sorry to say this, but unfortunately it didn't work. I just got the same error 21 as I usually get. This is really frusturating, I'm thinking of just giving up soon.

Thanks again for all the help everyone,
Foldor
Logged

Epaige

  • Archived User
  • Full Member
  • *
  • Posts: 195
Unable To Get Splinter Cell To Load Anything
« Reply #14 on: June 28, 2006, 08:39:00 PM »

QUOTE(foldor @ Jun 28 2006, 10:04 PM) View Post

I'm sorry to say this, but unfortunately it didn't work. I just got the same error 21 as I usually get. This is really frusturating, I'm thinking of just giving up soon.

Thanks again for all the help everyone,
Foldor



So you cant even use 1 of the evox exploits to gain ftp and then transfer over Ndure save via ftp?

Maybe you know some 1 that will let you use there MS card.

Also try a fresh download of Ndure and b4 you put it on the card... format the card via AR.
Logged
Pages: [1] 2 3