Topic: Broken Controller? Help! (Read 65 times)

Wireless Geek · « **on:** April 15, 2006, 07:39:00 PM »

It's possible the USB controller board became dislodged if you have one in your box. Try reseating it. You may not have one depending on the version of the mainboard you have. It's the board that all your controller ports plugs into.

-- Geek

Wireless Geek · « **Reply #1 on:** April 15, 2006, 10:07:00 PM »

You'll need to open it. It might not even be your problem. Some boxes don't have them. Do you know what version you have by the serial number?

wivenhoe · « **Reply #2 on:** April 16, 2006, 02:11:00 AM »

You will have the controller board then. You have to open up the xbox, unscrew the dvd/hard-drive caddy and lift that out. Then you'll see a small board just behind the controller ports which connects to the motherboard. Make sure it's seated in properly and see if that cures the problem.

jonels · « **Reply #3 on:** April 16, 2006, 04:49:00 AM »

I had to buy a daughter board for a ver 1.0 because ports 3 and 4 didn't work. It cost me a £10.00 including delivery, and I still have the old one (it has one of the little electronic thingys hanging off, but is way to teeny for me to even consider trying to repair) but ports 1 and 2 work fine. (if you live in the UK, you can have it).

btw.. this is kind of the wrong section for this.

btw2 ... have you tried you're controllers in ports 3 or 4, they may be OK.

Mitch_s_s · « **Reply #4 on:** April 16, 2006, 12:33:00 PM »

i'm having the same problems with mine
its not the ports though
3 of my pads are broke

i have one fully functioning pad

doing my head in

took em apart, and had no idea what i was doing so just put em back together!

can anyone help?

ps sorry to hijack your thread

Author Topic: Broken Controller? Help! (Read 65 times)