Topic: Brand New Xbox With Ltools 1.75 (Read 64 times)

dom0012 · « **on:** December 31, 2004, 02:02:00 PM »

Kernel is 1.00.5838.01
Dashboard is 1.00.5960.01

im trying to run ltools 1.75 on brand new xbox , it works but when i try to install ude2 it just freezes at the install screen, the black linux install screen.
do i need ltools 8 or what?
im using the m8 bios and pbl metoo
ive used this version of ltools on another new xbox and it worked but it was like 3 or 4 months ago, i think xbox came out with a new version to stop the hacks... if someone with experience could help me please do so
thanks

dom0012 · « **Reply #1 on:** December 31, 2004, 04:33:00 PM »

um some help would be great for all the quiet people, just tell me how to mod a brand new xbox without a modchip pleezzz

jcupp114 · « **Reply #2 on:** December 31, 2004, 05:37:00 PM »

You need to do a uxe exploit. Search for that in this topic thread or the xbe exploits thread, you will find it.

Good luck

jcup114

Millenia1x · « **Reply #3 on:** December 31, 2004, 06:03:00 PM »

just pm me i'll tell you

dom0012 · « **Reply #4 on:** January 01, 2005, 10:07:00 PM »

ok i found the uxe page, dont know how to use the fonts and patches, they are in zip format so what do i do with them? i have ltools 1.75 on my cpu, so how do i combine the packages with the ltools? or can i even do it with 1.75?

hottboy888 · « **Reply #5 on:** January 03, 2005, 11:28:00 PM »

I modded a v1.6 (week 38 2004) xbox using the itools 1.75 exploit for SC. i installed UDE 2, Pbl Metoo, and Evox M8 bios and it worked fine. only thing is make sure you dont use xbox live with this mod because with the newer box you will still get banned. hope this helps

ice_mouton · « **Reply #6 on:** January 04, 2005, 03:50:00 PM »

QUOTE

V1.6 owners
When running the installer from the graphical (MXM) interface you will not get any video output on the screen (due to an incompatibility issue with the linux kernel and the Xcalibur video chip). You can still run the menu options as explained above, but you will not see any output to the screen. You can however get the information from the screen by retrieving the ltools.log file from the game save dir after installtion.
On the first install the installer will make a compressed image of the C-drive, for safety reasons and later restore capabilities. This will take some time, so just wait some minutes. When the installer is done the LED will turn from orange to blinking green, indicating that it's safe to turn off the xbox.

jverse · « **Reply #7 on:** January 09, 2005, 01:24:00 AM »

OK finally got the Ltools 1.7 loaded onto teh box ...now when i go to play a burned game i get an error 21.....ANY HELP???

jverse · « **Reply #8 on:** January 09, 2005, 01:44:00 AM »

dom0012 · « **Reply #9 on:** January 12, 2005, 04:25:00 PM »

i had the same problem jverse, u have to go to the mxm.xml file and change it from dhcp FALSE to dhcp TRUE, so u will get the same ip every time.

As for the error 21 problem, i found that if u put the game in before, then turn on xbox with game already in drive it loads no problem, you cant load dvds from the dash some reason with ltools 1.75, atleast for me so try that JVERSE

ice_mouton · « **Reply #10 on:** January 17, 2005, 08:58:00 AM »

mmm dvds work fine from evox's launch dvd menu..... I have done about 25 xboxes (mostly 1.6) with ltools 1.7.5.... and never had any problems... Just never used mxm though...

Author Topic: Brand New Xbox With Ltools 1.75 (Read 64 times)