Topic: Aladdin Advance Xt (?) Diagram Help (Read 355 times)

aladdin64 · « **on:** November 16, 2004, 01:19:00 AM »

Hello.

The problem is that i screwed up an installation with this Aladdin-chip.
i belive to to be an Advance XT chip, because its not Live and its not Aladdin 32, 64 or Advance. Well anyway, if you look at my picture you see the spots i call 1, 2, 3, 4 and so on, some of them came loose´, so that don't have any connection any more. Could someone with a Advance XT chip use a multimeter and see how 1, 2, 3... corresponds with A, B, C.. ?

would be really grateful, and it could be usefull for everyone else that have had problems with their Aladdin chips..

(IMG:http://www.antonjarl.com/Aladdin-Advance-XT.gif)

Thanks alot for all contributions.. =)

Regards

aladdin64 · « **Reply #1 on:** November 16, 2004, 02:54:00 AM »

Found some of them out, still missing a few though..
Anyone could give me a hand here, i think this could be useful for some
other people as well.

Regards

verawarez · « **Reply #2 on:** November 16, 2004, 03:21:00 AM »

give some days for that, i have 3 xt mods, but it is late for now,

The next few days i gonna help u

Bye

Verawarez

aladdin64 · « **Reply #3 on:** November 16, 2004, 03:49:00 AM »

Ohh.. haha, sorry for being impatient.. =)

Sure, any help would be appreciated.. Thanks alot verawarez..

Regards

Evil Ryu · « **Reply #4 on:** November 16, 2004, 02:51:00 PM »

Normally there is a female pin header where A-L are. This is exactly the same thing as wiring the chip up via the LPC connections (1-9 in your diagram).

Here is what your corresponding letter & numbers should be (on your diagram):

A-not used for Aladdin chips
B-9
C-8
D-7-but not used for Aladdin chips
E-not used for Aladdin chips
F-6
G-1
H-2
I-3
J-4
K-not used for Aladdin chips
L-5

verawarez · « **Reply #5 on:** November 16, 2004, 11:56:00 PM »

One question i have diagrams for xt mods but it have been edited for my provider, so Do u have ur diagramas for alladin xt? if that pls post it in a new message

Then my help is not needed anymore so sorry for couldn't help u

So xt are official aladdin mods? or just clones?

Thanx

Verawarez

p.d if u want to send me something [email protected]

bye and if u need something else from an xt mod, i still have them

aladdin64 · « **Reply #6 on:** November 17, 2004, 01:46:00 AM »

Evil Ryu: Thanks alot! I updated the diagram now so all should be ok!
I think there are more of us who might need this diagram, so all credits goes out to you.

verawarez: I not to sure I understand what you're saying, are you asking if i got install-diagram for the XT? Hmm, actually i don't have that, I use those i found through this site only..
Maybe its time to make a good diagram for XT-Pinheader install...

Regards

robertjuric · « **Reply #7 on:** November 17, 2004, 01:56:00 AM »

There's not a whole lot to it. I used a SmartXX LPC rebuild diagram, it nice and large and simple. Besides that, it's BT, LFrame, and L1 to the chip. It would be nice to see a new one though, most of the ones showing where to solder BT and L1 on v1.6 boxes are not very clear.

aladdin64 · « **Reply #8 on:** November 17, 2004, 02:38:00 AM »

Ok, well I can see there's definitely room for a good XT tutorial here.
Well, I'm gonna put one together with additional pinheader-installation, all soldering points needed and so on, does anyone have nice pictures to contribute with or should i make everything myself?

Regards

robertjuric · « **Reply #9 on:** November 17, 2004, 05:50:00 AM »

I could snap a few pics. My digi cam is really good with closeup shots. If you need a specific area let me know.

My LPC rebuild:
(IMG:http://img.photobucket.com/albums/v490/robertjuric/LPCRebuilt.jpg)

The tape is b/c I used a longer bit of wire and it kept getting in the way.

And my complete install:
(IMG:http://img.photobucket.com/albums/v490/robertjuric/AladdinXT2.jpg)

I could take more if necessary. I did skip the BT and L1 points on the mobo and opted to ground out the LFrame and BT. But I could take a pic of the spot where BT and L1 go so someone could color label it.

LMK if I can be more of a help.

Evil Ryu · « **Reply #10 on:** November 17, 2004, 07:32:00 AM »

Next v1.6 I come across, I'll post some good pics of my install...

verawarez · « **Reply #11 on:** November 17, 2004, 09:31:00 AM »

Sorry if i'm not too good in english msg posting cuz i'm Mexican and my english is not as good as yours, but i do my best

Then Do u have installation diagrams for alladin xt? that's what i mean, cuz i have it and i didn't find any good installation pics for xt, the only pics that i have for installin are some of the pics that my seller sent to me, but they were edited pics of other type of aladdin mod, even in aladdin website they haven't any support for XT so i don't know if that is a genuine aladdin mod

If u want my pics let me know it and translate it to english cuz they are in spanish
if u have some good ones, pls post them, if not i could send mine

Verawarez

aladdin64 · « **Reply #12 on:** November 17, 2004, 10:11:00 AM »

Yeah sure verawarez, please post your pics and i'll complete a tutorial/info thread as soon as possible!

I'll take som pictures myself, as soon as i get hold of a 1.6 Xbox...

Gonna start with 2 ways of soldering a female pinheader onto the XT though..

Thanks alot all!

Regards

Firebaall · « **Reply #13 on:** November 17, 2004, 12:38:00 PM »

robertjuric · « **Reply #14 on:** November 17, 2004, 02:55:00 PM »

Are y'all talking about the diagrams that have XenoChip in the bottom right corner? If so, yes those are horrible.

All we really need pics of are the points for the BT and L1 points. The LPC rebuild is universal, and SmartXX has a really good diagram on how to do it.

The SmartXX LPC Rebuild Diagram:
(IMG:http://smartxx.com/pics/manual/lpc_rebuild_pin.jpg)

This post has been edited by robertjuric: Nov 17 2004, 10:58 PM

Author Topic: Aladdin Advance Xt (?) Diagram Help (Read 355 times)