Topic: I Need Help With 007 Save Or Splinter Cell (Read 161 times)

Ten-96 · « **Reply #15 on:** September 26, 2004, 10:49:00 AM »

Could you be a little more specific? What problems are you having?

Ten-96 · « **Reply #16 on:** September 26, 2004, 06:08:00 PM »

No problemo.

First, use whatever unzipping utility program that you have.( ie. winzip or winrar - both available at various freeware websites.)

Then, unzip the file to it's own folder.( Should be named something like 1.7.5 ITools - NTSC)
Next, unzip part1.zip to it's own folder, same for part2.zip; both will contain a UDATA folder. The complicated part comes when you have to get a datel.info file. You can get one from any other xbox game save. If you don't have any you can get them online. Try to get a splinter cell game save. If you want, I can email you one. Once you have the datel.info file, copy it into the folders that are in the UDATA folder. One should be a folder starting with 55... and the other starts with 2....(I'm not sure about the exact numbers. I'm not at my home pc right now.) Open the folders and then copy the datel.info file into both. After that, rezip both UDATA folders. You should then be able to drag and drop them into you Action Replay program; either staright to mem card or to pc database.

bffelon · « **Reply #17 on:** September 27, 2004, 06:07:00 PM »

u see, i have a 5838 dash, and a 1.6 box, ive been using the 007 ltools 1.75 pack, and the menu navigates fine and all but, if u try to install something or anything like that, u get a green spazzy screen, but ive been going by the status light on the xbox (orange="working" / green blinking light=done) so after its "done" i turn off my, xbox turn it back on and boom, ms dash. Ive tried many combinations of installations and still i get the ms dash.

hitmanevox-240sx · « **Reply #18 on:** September 27, 2004, 06:18:00 PM »

ok first i got the save and i did as i was told by all these crazy tutorials and then after i went to load missinion it didnt even blink it just went black and evox came up. also theres some fetures that are missing like skins and also run dvd game. some1 plase help....

PCBUILDERCHRIS · « **Reply #19 on:** September 28, 2004, 10:07:00 AM »

press the b butto at that menu and select install ude

demetriojames · « **Reply #20 on:** September 28, 2004, 10:47:00 AM »

i have two xboxes...one with an executer modchip...and one i'm trying to softmod using the splinter cell hack....my modded xbox has no problem using the hacks with mod off...but everytime i try it on my no mod xbox i get screen error 21..(get as far as checkpoint on the linux profile)..i've tried the splinter cell exploit to ftp into it...but still get the screen error 21....and the itools = same result....i do not know wat todo next? i don't believe it's a signed thing deal...since my other xbox has no problems doing it all with the chip disabled...

rd350ypvs · « **Reply #21 on:** October 02, 2004, 05:55:00 AM »

Here is the method I used to soft mod 3 xboxs using splinter cell, it defo works on Xboxs prior to 1.6

***Update using a game that has Xbox live your dash to version 5690***
Apparently, it only works if your xbox has an xbox live tab

1) Download the ltools splinter cell hack and un rar into the 2 files part1.zip and part2 zip

2) Copy this 2 files to your mem card (I used AR), they should come up as Linux Installer and Splinter cell save

3) Copy the 2 files from your mem card to your xbox using the inbuilt msdash on the xbox

4) Boot up Splinter cell, goto load campaign, then choose Linux

5) MXM will load and this next step is the one that catches most people out

6) HOLD B AND PRESS DOWN

this will take you to the UDE1 install, follow the prompts to then install

7) After ltools has made a backup of your hard drive it will copy some files across and modify others, you may then turn off your xbox

Bingo, your xbox is now softmodded

andyw

dolphumous · « **Reply #22 on:** October 18, 2004, 11:44:00 AM »

rd350ypvs · « **Reply #23 on:** October 21, 2004, 02:33:00 AM »

just use a Xbox live game to update your dash, then run UDE1 again, it should work.

andyw

spacemaster · « **Reply #24 on:** October 24, 2004, 07:31:00 AM »

XboxN00by21 · « **Reply #25 on:** November 27, 2004, 12:20:00 AM »

Try using an older version of ltools prior to the 1.4-1.6v.Not sure it that'll work or not.

Author Topic: I Need Help With 007 Save Or Splinter Cell (Read 161 times)