Topic: Mechassault Exploit Non Modded Xbox (Read 84 times)

forthex · « **on:** September 10, 2004, 09:52:00 PM »

)

1. put a gamesave exploit with Evox on a normal, stock, working xbox, and load it. get the exploit off of xbins (it should be (game of your choice)_with_evox.rar) and put it on the working xbox. Once you get FTP access, back up the good xbox's HD to your computer.

2. hotswap from your bad/dead xbox to the good xbox (pull the IDE cable out as soon as you see the micro$oft logo under the X logo, and as quickly as you can, put it in the working xbox HD IDE cable.

3. Now, once you can get into your bad xbox's HD, put the back up of the good xbox's HD on it. And you should be ok.

forthex · « **Reply #1 on:** September 10, 2004, 09:53:00 PM »

Ah crap, double post.

contrabrass · « **Reply #2 on:** September 10, 2004, 10:05:00 PM »

thanks for the help forthex, i was wondering if i need to downgrade my dashboard to get ude working or do you think ill be ok?

forthex · « **Reply #3 on:** September 11, 2004, 11:24:00 AM »

no, the UDE works on any dash: 3944-56xx +. So, your fine.

eh. · « **Reply #4 on:** September 11, 2004, 01:18:00 PM »

(Sounds like UDE2 will specifically be needed, as the new box almost certainly has a recent kernel eh.)

rwsouthpark98 · « **Reply #5 on:** September 16, 2004, 10:40:00 AM »

I just softmodded my xbox and just got the new HD upgrade to work. It uses the ldots software and all you have to do is add a few xtra things to the .iso it makes. I followed a tutitorial but it wasn't one of the 3 on the forums. Damnit, I wish I was home so I could give you the link. Don't fear though, I will be there in a few hours and if you would like, I will provide the link for you. It took me a little over an hour maybe, because I ran into a few snags (my fault).

Noob here, I was also wondering if anyone could answer a question for me. I am wanting to install slayers evox 2.6 on my softmod. I used the ldot team_ tutitorial with the xboxhd. I was able to launch the slayers cd, but I cannot launch the dash (once it says it's in stalled), it gives me an error 21. Is there a way to integrate it into the ldot method?

Any help is appreciated!

dankduke · « **Reply #6 on:** September 16, 2004, 06:58:00 PM »

Yes,

I am curious to learn how to add a bigger hard drive into a softmod...i have unsuccessfully tried and wont do it again until i am 100% on directions and what to do...

POST how you did it and a LINK pleze.

SantaClaus · « **Reply #7 on:** September 17, 2004, 12:02:00 AM »

You're just getting the error 21 because UDE doesen't work. It's fake.

rwsouthpark98 · « **Reply #8 on:** September 17, 2004, 09:53:00 AM »

I used this method for the new HDD:
http://forums.xbox-s...opic=270469&hl=

It worked without any problems.

As for slayers, I got it to run..

Author Topic: Mechassault Exploit Non Modded Xbox (Read 84 times)