Topic: Using A Usb Stick To Transfer Gamesave Exploits! (Read 2079 times)

forthex · « **Reply #120 on:** September 06, 2004, 02:58:00 PM »

the Evox hack will only temporarily get you into Evox, once you turn off the Xbox, or eject the DVD tray, your xbox will reset, and you will loose Evox access, unless you load the exploit agian. the UDE installer will install the UDE exploit, the BIOS loader of your choice, BIOS of your choice, and the dashboard of your choice, and it will do it all for you. So, yes, everything is ok so far for you.

xavierofsparta · « **Reply #121 on:** September 06, 2004, 02:28:00 PM »

ok but not in the AR prog. part 2 says splinter cell and im using the mech Ass. hack

is this still correct

if not how would i go about fixing this

thanks

forthex · « **Reply #122 on:** September 06, 2004, 02:45:00 PM »

the datelinfo.xbx you got was from a Splinter Cell Save, correct? the datelinfo file is the way to check that the save is valid. For example you could write a name on a nametag, that was not yours,and wear it. This is the same with the exploits, it is still the exploit, but is under a different name. When you put it on the xbox, however, it will have the correct name and work with the game of your choice.

G20NYK · « **Reply #123 on:** September 06, 2004, 02:49:00 PM »

correct, it is a SC file, however I cannot load it into AR, thus I cannot load it on to my thumb drive...

forthex · « **Reply #124 on:** September 06, 2004, 03:32:00 PM »

are you sure that the file is in both of the saves, and that they are zipped, not rarred or put in any other archive format?

xavierofsparta · « **Reply #125 on:** September 06, 2004, 03:01:00 PM »

no i got my datalinfo from the mech ass. game from AR. so is this messed up or not

also when i tried to put the files on my xbox i cant get the copy function in the memory screen. do you know what this is all about

i got the file onto my computer but when i turn on mech ass. i cant find the file under campaign mode

thanks

forthex · « **Reply #126 on:** September 06, 2004, 03:06:00 PM »

mechassult can't load gameaves from memory cards, not anyother game i know of. go into the dash, then "MEMORY", then go into the memory card, highlight the save, press the D-pad or the joystick right and copy over the individual files.

PaKI · « **Reply #127 on:** September 06, 2004, 03:14:00 PM »

I am using ldots UDE installer (007 Version). I opened the UDATA folder, but there is only one folder with the name 4541000d. In the guide it says there will 2 folders. Even though, I continued and put the DatelInfo in the first folder. Then I zipped the save and transfered it to the AR saves folder. When I opened AR I can't find the ldots folder anywhere in AR.

Thanks in Advance

forthex · « **Reply #128 on:** September 06, 2004, 03:19:00 PM »

as soon as you transfer a save to the PC DATABASE column, look for a folder that has been expanded. that should be the installer.

procoprio · « **Reply #129 on:** September 06, 2004, 06:47:00 PM »

I know alot of people including myself are still having problems with the AR software recognizing our USB stick. The Xbox loves my lexar stxk its just AR not playing nice. Any ideas guys? Im to the point where I just want to trade my unmodded Xbox in for a modded one.

forthex · « **Reply #130 on:** September 06, 2004, 07:15:00 PM »

if you want to. I mean, if you have the money to get a chip and have the time and patience to install it, DO IT!! chips are WAY better than UDE or any toher software hack. But, if you can't or don't want to get a chip, the software hack is the way to go.

InfoUnknow · « **Reply #131 on:** September 06, 2004, 08:24:00 PM »

Hi forthex,

I have "Linux" in my dashboard. Now, I want to run the evox dashboard. Where can I find the build-in savegame ? I don't want a permanent installation of the evox dashboard. Only use it when I need it. What is the best way to do this ?

thanks

SteinerCS · « **Reply #132 on:** September 07, 2004, 11:29:00 AM »

I just don't get it. Everything works.... I get to the very end and then it says it is not a game save.... Why??? what am I doing wrong?

Can I fix it. Will it work is it my PNY 64MB USB Thumb Drive?
Help
Thanks

forthex · « **Reply #133 on:** September 07, 2004, 08:00:00 PM »

Info, I STRONGLY recomend you remove the Linux fonts from the xbox harddrive, becuase they are crappy font exploits, and you can get into a clock-loop if you aren't careful. Anyway, you just want the gameave exploit, that get's you temporary access to Evox. In xbins, go to "/XBOX/exploits/_Packages/" and choose a the came of your choice, so the save would be (your game)_with_Evox".

stien, make sure the datelinfo.xbx file in BOTH saves: this is the main cause of many failures, and double, no... tripple check the file is ANYWHERE in BOTH of the saves. AND ZIP THEM, NOT RAR THEM!

toast4321 · « **Reply #134 on:** September 07, 2004, 10:06:00 PM »

quick note.. i tried using a diamond usb stick and a 128 mb rca lyra mp3 player. none were detected by the xbox therefore i couldn't format them or do anything. i'll go try other devices and see if i can get my hands on one of the ones listed

Author Topic: Using A Usb Stick To Transfer Gamesave Exploits! (Read 2079 times)