Print

[mgillaus]

hi there, all you wanting to try out this save now you can download it.
It doesn't contain the Evox .xbe file , so I can list it here, you just have to insert your own you get from the usual places, PS i have not yet tested the NTSC version as I only own the PAL version. It should work fine tho.

PAL Version
Download The Pal Version Here

NTSC Version
Download The NTSC Version Here

.NFO
splintercell_evox.nfo

These are both around 10Kb each.

Ok, to make use of this (for both versions)

Unrar the file.

In the:

UDATA215855540000000000

the 000000000000 dir

insert your habibi signed evox file as install.xbe
there is a evox.ini file already in there.

You must make sure that this is the ONLY splinter cell savegame on your Xbox HDD, so either backup the other saves or delete them..

after this just copy the folders to your Udata folder on E Drive, or put them on your memory device and copy to your xbox hdd

21585554
5553000c

They show up as splinter cell and Linux Installer in the ms dash

then start up splinter cell
Choose START GAME
Choose LINUX
Choose CHECK POINTS

if you have done it right, then evox will come up

cheers

This post has been edited by mgillaus: Jan 15 2004, 05:23 AM

[Kyro]

QUOTE (mgillaus @ Jan 15 2004, 07:14 AM)

[...]insert your habibi signed evox file as install.xbe[...]

why don t you try to insert pbl signed with habibi (and then will load evox...) instead of evox directly?

[mgillaus]

QUOTE (Kyro @ Jan 15 2004, 09:08 AM)

QUOTE (mgillaus @ Jan 15 2004, 07:14 AM) [...]insert your habibi signed evox file as install.xbe[...] why don t you try to insert pbl signed with habibi (and then will load evox...) instead of evox directly?

i couldn't get xbtool to work creating a bfm bios that would load evox from the savegame dir, if anyone else can get xbtool to work please would you tell me how

[jsyyyn]

does this work for kernal 5530?

[tmh]

QUOTE (mgillaus @ Jan 15 2004, 12:26 PM)

i couldn't get xbtool to work creating a bfm bios that would load evox from the savegame dir, if anyone else can get xbtool to work please would you tell me how

I think if u get xbtool from "the usual places" it comes with sum xtra filez -- bfm_2bl.img and bfm_remainder.img - also I think u hav 2 use either the debug ini or the bfm.ini that comes with it. (put it in ur config folder) - not 2 knowledgeable with xbtool but think this will work.

[hbidad]

yes, worked perfect with 5530 for me! Thanks guys!

[jsyyyn]

HBIDAD-- COULD YOU GIVE ME THE RUN DOWN ON WHAT YOU DID, I'M NOT REAL SURE HOW TO USE THIS AND WHERE EVERYTHING GOES.

[mgillaus]

QUOTE (jsyyyn @ Jan 16 2004, 12:26 PM)

HBIDAD-- COULD YOU GIVE ME THE RUN DOWN ON WHAT YOU DID, I'M NOT REAL SURE HOW TO USE THIS AND WHERE EVERYTHING GOES.

where exactly are you going wrong?

try this.

once you get the rar, unrar it
go in the Udata folder
you'll see 2 folders

21585554
5553000c

ok..

now, get a copy of evox's default.xbe file

get a hold of xbedump

run:

CODE

xbedump default.xbe -habibi

that'll sign it for habibi, ready to insert into the save

it will create a file, out.xbe, grab that and rename it to install.xbe

ok get that install.xbe you renamed and put it in the 000000000000 folder

(this 000000000000 folder is in the 21585554 folder)

you should then have in that 000000..folder:

evox.ini  <- already there
install.xbe <- you just put this in
SaveImage.xbx
SaveMeta.xbx


once you have that in there, go back up a few folders to Udata.

now to put it on your memory card or xbox hdd

for mem card: use whatever method u use to put saves on there, just make sure you put both the 21585554 & 5553000c folders on the card.

for xbox hdd directly
ftp in, goto e:, goto udata, then grab your 21585554 & 5553000c dirs and chuck them in there, if you need to copy these to a memory card from there, load the ms dash, and choose the LinuxInstaller and Splinter Cell 'Linux' savegames and copy them to memory card


then start up splinter cell

Choose START GAME
Choose LINUX
Choose CHECK POINTS

and then evox should load!


I hope this helps you out

[Nil8er]

For which version of Xbox will this exploit work?  I would like to not have to open my xbox... I was hoping to use the Action replay work-around.  

[mgillaus]

QUOTE (Nil8er @ Jan 16 2004, 01:24 PM)

For which version of Xbox will this exploit work?  I would like to not have to open my xbox... I was hoping to use the Action replay work-around.

This should work on every version of xbox, 1.0 to 1.5, the dash should not matter as this is a gamesave and works from the game, and the kernel versions should not matter either, unless of course you make it try to load phoenix from a 5530 or 5569 kerneled (word?) xbox, phoenix currently will not work on those.

But if you load evox directly, yes this should work on all versions.

[queebs]

this looks interesting
i am going to try it later this evening

[Zak0]

Thought I'd post another success story - I just got it to work on my modded box.  Will be trying a friend's unmodded box tomorrow.

I'd like to have a version of this that boots into a copy of Linux with the raincoat executable available (like the 007 TSOP-flash save game does).  Anyone have any idea what would be involved in that?  Alternatively, my friend has a v1.0 or v1.1 box, so I should be able to flash with EvoX - if I want to do that, can I just add a BIOS folder to the 000000000000 directory and stick it in there?

-Zak

[jenz]

It doesn't work on the 1.5    

[Y2X]

Im trying to do this exploit and have gotten to the point that I need to insert the UDATA files on my memory card using AR. How exactly do I go about doing this? I tried zipping the contents and that did not work.... Any pointers?

[_ionic_]

The splinter cell exploit works on every xbox.

Including 1.5