Topic: No Modchip Hdd Replacement Tutorial (Read 757 times)

BaD_HeX · « **Reply #105 on:** October 03, 2003, 11:34:00 AM »

Each Sector is 0x200 long (512 bytes), so you push -> 3 times and add that to the start of the sector in the right column. Doing the math 200 + 200 + 200 = 600.

ajaxdude · « **Reply #106 on:** October 11, 2003, 09:39:00 AM »

I am stuck on Step 5. Liveinfo does not see any drives, all it says is Physical Drive 0 and in the drop box there is Physical Drive 1 2 3.

What do I do?

The drive I am trying to use is WD800JB

thanks

flergle · « **Reply #107 on:** November 28, 2003, 09:54:00 PM »

i made a clone of my xbox hardrive with winhex, but i try to copy the image to my new hardrive and it just gives me a error message about a user.txt. what am i doing wrong. I made a image of my xbox drive but cant put the image on the new hardrive.

rex_dogg · « **Reply #108 on:** November 29, 2003, 01:07:00 PM »

hey! Bad_Hex every thing good and all, but i have trouble finding the apps that your tutorial is using... could you be that nice to tell me where i can get then... if you can't post it my email is [email protected]. Thank you for your time....

REX_DOGG

SpikeMage · « **Reply #109 on:** November 29, 2003, 03:08:00 PM »

You can find all f them on THIS site.

philpw99 · « **Reply #110 on:** November 29, 2003, 08:44:00 PM »

sorry, wrong thread, BUMP!!

ShadowOryan · « **Reply #111 on:** November 30, 2003, 02:31:00 AM »

well i havea question....

i bacjupoed my h arddrive and hexed and prepared my replacment, no when i open hdd_driver is says, "good news" "detected a xbox harddrive..." but then after it it doesnt say "invalid file size"

what should i do?

ShadowOryan · « **Reply #112 on:** November 30, 2003, 03:29:00 AM »

well i restored it anyway, and did all the rest of the steps, now my xbox is in a stupid clock loop...i wanna check if it works...dang...any good tips on getting out?

EDIT: Spelling :-

ShadowOryan · « **Reply #113 on:** November 30, 2003, 07:43:00 AM »

CHA-CHING, thanks Bad_hex it worked...

just one more question, how do i open up my g parition since i have a 160gb maxtor, or how can i put the rest of the space into the f partition without makinga G:

Thanx,
Oryan

EricG · « **Reply #114 on:** December 06, 2003, 06:28:00 AM »

Liveinfo doesn't "see" my external usb hdd. I'm running win2000pro on a 500 mhz notebook. Liveinfo "sees" the hdd in the notebook just fine. Is this because Liveinfo bypasses all device drivers and therefor isn't aware of the external usb drive, or am I doning something wrong?

gunboat · « **Reply #115 on:** December 16, 2003, 10:05:00 AM »

i kno this is a really noob question but whatever... can i use this tut to swap a bigger hard drive into my xbox when using the audio hack?? or does it depend on the softmod u have??

Thing2 · « **Reply #116 on:** December 16, 2003, 11:42:00 AM »

So...has anyone done this successfully with Winhex? ANyone else that is? Is it easier than the other way? If so...which steps do you skip? And which do you keep?

Do you just clone the XBOX HDD right onto the new one? Then lock the new one? Is it really that simple?

Any help would be appreciated.

Thanks

Heteros · « **Reply #117 on:** December 27, 2003, 09:29:00 PM »

Ok I need some help... I have the Maxtor 6Y120L0 I've seen in many places that it can be Locked.. But It's not doing it... I am also getting this message from several differnet programs...Locking: Not Locked, Frozen I've followed this guide to the "T" Thanks for your help

{later} · « **Reply #118 on:** December 27, 2003, 11:50:00 PM »

QUOTE (Thing2 @ Dec 16 2003, 09:06 PM)

So...has anyone done this successfully with Winhex? ANyone else that is? Is it easier than the other way? If so...which steps do you skip? And which do you keep?

Do you just clone the XBOX HDD right onto the new one? Then lock the new one? Is it really that simple?

Any help would be appreciated.

Thanks

Yes, I used WinHex and it's much easier then HDD Driver. You can skip the hdprepar thing (not needed) als you can skip step 6 fully. Then just load WinHex and select Clone Drive andthen you need to lock your new drive with the password you got from liveinfo. And done

And Heteros:

The Maxtor 6Y120L0 IS lockable! I have it running in my xbox right now by following this tutorial! Try to connect it as primary master to your PC and your windows drive as primary slave.

Heteros · « **Reply #119 on:** December 28, 2003, 08:15:00 AM »

Ok... Thank you all in advance for the Help....

I have the Maxtor 6Y120L0 It is currently set up as the Primary Master, (bootable secondary master) atapaw.exe says: "it's Frozen", Live info says:, "Locking: Not Locked, Frozen" I've done the Hex Edit, Copied the XHDD, the Unlockx.exe says: "it's not a lockable drive", HDlock says: "Device not ready" HELP!! I know this drive will work! I also spent the last 9 hours (while I was at work) Doing a zero reset full drive wipe... Thank you again THIS DANG THING WILL WORK!

Author Topic: No Modchip Hdd Replacement Tutorial (Read 757 times)