xboxscene.org forums

Pages: 1 ... 10 11 [12]

Author Topic: How To Use A Cheapmod Sst49lf020 On A 1.6 Box  (Read 784 times)

Da_RaVeN

  • Archived User
  • Newbie
  • *
  • Posts: 3
How To Use A Cheapmod Sst49lf020 On A 1.6 Box
« Reply #165 on: March 30, 2005, 02:58:00 PM »
cool.gif
Logged

Da_RaVeN

  • Archived User
  • Newbie
  • *
  • Posts: 3
How To Use A Cheapmod Sst49lf020 On A 1.6 Box
« Reply #166 on: April 05, 2005, 04:28:00 AM »
wink.gif
Logged

deadspider

  • Archived User
  • Newbie
  • *
  • Posts: 46
How To Use A Cheapmod Sst49lf020 On A 1.6 Box
« Reply #167 on: May 23, 2005, 04:59:00 PM »
hi all i tried this on a 1.6 and it works great but my question is will it work on 1.6b ??

had anybody tried it ?
Logged

otherguy

  • Archived User
  • Sr. Member
  • *
  • Posts: 294
How To Use A Cheapmod Sst49lf020 On A 1.6 Box
« Reply #168 on: June 01, 2005, 04:04:00 PM »
non b's also have brown cables. IT depends on the factory the xbox is made in.
as for dead spider's questions. It will work fine provided you use a good bios.
Logged

verawarez

  • Archived User
  • Newbie
  • *
  • Posts: 37
How To Use A Cheapmod Sst49lf020 On A 1.6 Box
« Reply #169 on: June 02, 2005, 11:59:00 AM »
Are there any alternative points at the downside part of the mobo to link again the lframe? im having some problems with a cheapmod installed first it was giving me some reading errors, then i resoldered all and i though i fixed that but nah, now sometimes when i turn on the console sometimes boot, sometimes have no video

What it could be? i think sst wires to the mobo are a little long

But first i want to know if there are any alternative lframe poinst on the rear of the mobo

Thanx a lot

See u
Logged

verawarez

  • Archived User
  • Newbie
  • *
  • Posts: 37
How To Use A Cheapmod Sst49lf020 On A 1.6 Box
« Reply #170 on: June 02, 2005, 12:00:00 PM »
And i used kynar wires on all points, so i need to use any other wire for ground or power, i dont know, which suggestions could u give me

Thanx

See u later

Verawarez
Logged

TiaoMacaleh

  • Archived User
  • Newbie
  • *
  • Posts: 13
How To Use A Cheapmod Sst49lf020 On A 1.6 Box
« Reply #171 on: July 21, 2005, 01:14:00 AM »
what about 49LF002a , its the same chip on this topic?
Logged

Chancer

  • Archived User
  • Hero Member
  • *
  • Posts: 5751
How To Use A Cheapmod Sst49lf020 On A 1.6 Box
« Reply #172 on: July 22, 2005, 03:18:00 PM »
This is turning into a general " I have problems with my install" thread.
If you messed up an install post in the main section.
Topic locked
Logged
Pages: 1 ... 10 11 [12]
« previous next »