xboxscene.org forums

Author Topic: Lpc Diagnostic Tutorial - Need Clarifications  (Read 24 times)

moddogZ

  • Archived User
  • Newbie
  • *
  • Posts: 9
Lpc Diagnostic Tutorial - Need Clarifications
« on: February 21, 2006, 12:59:00 AM »
If you have a solderless chip its fragging due to the end of the chip without a screw not macking a full connection....if you have a soldered chip double check your LPC rebuild for solder conection points...what V of xbox do you have, the V1.5 and V1.6A-B are to my knowlege the only ones that require you to rebuild the LPC....

When the chip is out does it frag?
when the chip is in does it frag 3times and then flash?
Recheck your MOBO VERSION and B sure you need a rebuild of the LPC(I have made this mistake myself)


Moddog
Logged

ItchyB

  • Archived User
  • Sr. Member
  • *
  • Posts: 289
Lpc Diagnostic Tutorial - Need Clarifications
« Reply #1 on: February 21, 2006, 03:58:00 AM »
The voltages on the LPC should be constant, power on the xbox with HDD and DVD out, Chip off and check the voltages. If you are checking a pin header install and the voltages vary check your soldering, if you are checking an lpc with no pin header and the voltages vary then check for brokrn traces.
Logged