Topic: 616t Does It Improve Ftp Speed? (Read 139 times)

Pele76 · « **Reply #1 on:** December 12, 2003, 02:10:00 AM »

This is a tough question to answer because people seem to get a whole lot different ftp speeds. The speed depends on many different things. The question is what the bottleneck in your system is.

You could compare FTP transfertimes from the HDD and the drive... If the DVD timings are slower than the timings from the HDD then the FTP speed probably would gain if a DVD drive with higher reading capacity were used...

As for the question about how fast a modded 616 will read I don't know... Someone else will have to answer that question.

CaliSurfer008 · « **Reply #2 on:** December 13, 2003, 10:20:00 PM »

I have a 616t and i did not notice any speed differences...I think the speed is mainly determined by your network setup

shank69xo · « **Reply #3 on:** December 13, 2003, 10:37:00 PM »

QUOTE (CaliSurfer008 @ Dec 14 2003, 08:20 AM)

I have a 616t and i did not notice any speed differences...I think the speed is mainly determined by your network setup

I didnt notice an increase in FTP speed because of this drive. I have a - burner. All 3 drives read the - format with no probs. I would hate to have to use 2 discs between me and my kids.

regulater7 · « **Reply #4 on:** December 13, 2003, 10:58:00 PM »

just pop in a new 616t.. ftp are the same accualy i got like maybe 5% better speeds but i think thats cuz the laser isnt so senative. i would just by a new 616t so u dont have to use multiple disks.

Lutz · « **Reply #5 on:** December 14, 2003, 01:19:00 AM »

ok.,... if it's the cable, then the HD would also be slower? uses the same cable.

I can only assume that the weak link is the DVD, as the cable is fine for the HD at about 10,000 kbits per sec, whilst the dvd runs at about 1600 kbits per sec. If the cable was teh weak link, then they would both be the same speed.

I think that theoretically a 4x dvd will max out at 1600. way under the xbox ftp capability.

I was hoping that wacking a faster dvd might be benificial, but i guess once you flash it, then it behaves as per the 605... ie no speed increase...

Anyway.... the disk issue wont be around for long as I got the kids a 80g hard disk, so not much need to interchange disks as such...

Anyway... thanks guys, I might wait till the thomsen dies or i can get a bargain, whichever comes first!

Cheers...

Lutz

Lutz · « **Reply #6 on:** December 14, 2003, 01:26:00 AM »

CaliSurfer008, did i read you right, in that it can't read + format disks?

I have a plus burner, i thought the 616t read anything?

Anushian · « **Reply #7 on:** December 15, 2003, 11:39:00 AM »

QUOTE (Lutz @ Dec 14 2003, 06:26 AM)

CaliSurfer008, did i read you right, in that it can't read + format disks?

I have a plus burner, i thought the 616t read anything?

According to http://www.dvdplusrw.org/, the Samaung 616T reads both +R/RW Media.

toyato89 · « **Reply #8 on:** December 15, 2003, 12:16:00 PM »

I have never noticed a speed increase or anything, but mainly since I haven't ever done the DVD to PC directly. One thing I can say though, is that the dvd2xbox copying times have decreased SUBSTANTIALLY. My friend has the Thomson drive, and we usually get together to sync up our xboxes, and his takes way longer to rip a game than mine, so we usually just rip it on mine then ftp it over to his, as it takes less time. FTP speeds are roughly 7000-8000k/sec w/ XB-FTP, and 5000-7000k/sec to the PC, but that's from the HDD, not the DVD.

mhr_54 · « **Reply #9 on:** December 15, 2003, 12:25:00 PM »

Maybe someone needs to update the original Xbox firmware so it supports the speeds tof which the drive is capable. This shouldn't affect the Xbox reading the disks if we made the Xbox think 16x is its normal speed.

toyato89 · « **Reply #10 on:** December 15, 2003, 12:26:00 PM »

good idea, but are you talkin the SDG-605 firmware or the xbox bios?

mhr_54 · « **Reply #11 on:** December 15, 2003, 12:28:00 PM »

Do you have to burn games and files to DVD for the Xbox to read them? Or can you burn them to CD instead?

mhr_54 · « **Reply #12 on:** December 15, 2003, 12:32:00 PM »

I'm talking about the drive firmware. If when the Xbox sent the signal to run at whatever speed it normally does and the firmware then ran it at 16x anyway you could run it faster. If the Xbox normally ran at 8x and x is the Xbox speed and d is the drive speed then it could be symbolized like this:

if x = 10
then y = 16

It would only take a little bit of coding to make the firmware do this.

Perplexer · « **Reply #13 on:** December 15, 2003, 02:35:00 PM »

That would be nice indeed. I remember my Teac CD532S CD-ROM drive had a tool which would modify the firmware to allow higher read speed and DAE speed. Here for reference. If I knew how to write/modify firmware, I'd give it a look...

punisherex · « **Reply #14 on:** December 15, 2003, 02:53:00 PM »

hello i have an oem samsung drive that my stock xbox came with. i was wondering what is the speed on the drive and the one i have reads every single disc i put in it from cdr-dvdrw. example is it 4x 6x etc

Author Topic: 616t Does It Improve Ftp Speed? (Read 139 times)