Print

[CamdogXIII]

pk i want ot connect ot my xbox to insall evox, no wireless connection or anything i just want to know how to connect to my xbox ( have flash fxp, have rj45 cable, have evox boot disk working, and read tuts no help.)

[Blast_man]

If im using to ethernet cards to connect to my xbox does one of the HAVE to be connected to the internet?

[kidkash]

Blast_man
nah, it does'ent...



and ...

CamdogXIII
erm, weird, all i can think of - maybe a wrong setting on the xbox? - cause once the crossover cable is hooked into a network card... it should work

[inVINCEseeble]

Hello. My xbox says NO LINK. I don't have a modchip, does that make my FTP using crossovercable not work?juz to make sure I bought the right crossover cable: RJ45 Male/Male Category 5e Snagless Patch Cable, Ethernet Tolken Ring. is that the right one?

[basefont]

QUOTE (star^ @ Jan 10 2004, 11:48 PM)

I have a little problem. I have 2 network cards in my pc. One of them are for the internet thats i get from a hub that is connected to a wireless internet concection. The other card is connected with my xbox. I do not want to connect my xbox to the internet so that is clear. The problem is that when i turn on the xbox and go on the xbox via ftp i loose my internet conection. It just goes down. To get my internet working again i have to unplug the crossover that is connected to the xbox. My internet ip is 10.41.159.3 and the ip for the other network card is 192.168.0.1. Xbox ip is 192.168.0.3 what to do?

Hi
im also trying to connect to my lan(no internet) via wireless bridge to accesspoint and nat router for access from my PC

internal ip is 192.168.0.1.

and xbox via access point 192.168.0.5

Xbox have dchp active where should i put this IP
I have avalaunch os

on static ip ?
on gateway? now i have 192.168.0.1 at this place

FTP settings??


regards
Basefont

[sniper911punk]

i just got my xbox modded i put in a mod chip a new harddrive and evox on it and i want to network it. i am going trough a hub with a broadband internet connection and i am useing flashfxp for my file sharing program every time i try to connect to my xbox it say that it is timed out and tries to reconnect and it just goes on forever what am i doing wrong??

[trumonoxidechild]

allright, i just got my modded xbox yesterday, yet when i attempt to ftp (using crossover cable, all ips appear correct, etc. etc.) it just will NOT connect, im just trying to connect xbox-pc no internet involved

[bmxer2076]

hello, im a n00b, with 2 xboxs, i want to hook one up to my network so i can ftp, but i dont have any mod chip installed, do i need one? i have a lynksys wrt54g router, will this work, i also want to play xbox connect, could anyone help me? [email protected]

[G-FORCE420]

I have a 56K Dial-up Modem and an Ethernet Card (10MBps I think?)

Anyways, can I network my XBOX using this one ethernet card???

[ryfly1805]

when i try to ftp my xbox to my pc, i get connected but then get the reply
"This site may not allow file resuming"
that never happened before.. does anyone have any clues??

[heraldoffailure]

QUOTE (TalinTheLost @ Jan 6 2004, 03:53 AM)

Just a word on wireless.... dont use it if you're going to be transferring large files. Typical Cat5 cable is around the 80-90mbps (even tho it says 100  - 100 is only the "theoretical max"). Wireless on the other hand... there's different speeds again. You have 10mbps, 22, 54, and i think there's also a 76 now too? anyway.. my friend has a 22. the max he can get is 11mbps. i have a 54 - the max i can get is 19-20. and no, this is not just bad settings. what they say is that "54mbps" is only theoretical - its actually not obtainable - they even admitted that to me in the end. was not impressed anyway...back to the point. even at 20mbps... are you sure you'd want to wait 15 minutes to transfer something rather than 3? no..i'd say not

Wireless giving you actual transfer rates of 54MB or above is BS.  You'd be lucky to break the 10MB/sec mark with your card right on top of the access point.  If you plan on doing anything besides connecting to the internet, don't do wireless.  (this even goes for cards that boast 108MB/sec)

[J07W18E79]

I use dial-up and was wondering how to check to see if I got a network card on my PC. Ive got a place on the back of my computer that is alittle bigger than a phone line. If that means I have one, how would I configure it? I have a HP with Windows 98

[TommyMartyn1]

Please help an idiot out (me), I'm desperate, my girlfriend isn't speaking to me cause I spend all my time meddling with this damn PC

Before I start asking for help you have my word I have read the tuts. I’ve read the tut by fin1581 but it’s not helping me figure this mess. I’ve installed a network card and am attempting to configure it. I am way out of my depth. When I click on the Network option (windows 98) I receive the following message:

“Your Network is not complete. Do you want to continue.”

If I select yes I am presented with the following list

Configuration tab
MS family logon
Dial-Up Adaptor
FD500, PCI  Card/Desktop Network PCI Card   (my network card)
MS Virtual Private Network Adaptor
NDISWAN – MS Virtual Private Network Adaptor
TCP/IP – Dial Up Adaptor

Identification tab
Computer name: PBN_Computer
Workgroup: PBN_Workgroup
Computer Description: PBN_User

I just don’t know what to do next do I select my network card and click on add? If yes I am then presented with the following options:

Client
Adapter
Protocol
Service

I don’t know which one to select. Please help, I was well gutted when I came up against this. I just don’t know how to configure this stupid card. Fin1581’s tutorial looked easy but I just don’ know what I’m doing.

Any help will be greatly appreciated. You have my word that I will share any knowledge I learn and assist others in future. It’s what forums are about right? Incidentally I started to just mess around figured the solution might just appear and I managed to loose my internet connection which left my really distraught. I managed to get the connection back my installing the network card. That was sheer luck more than anything. I felt like chucking the card out of the window.

Thanks
TommyMartyn

[iskiiiiii]

Am I able to link my xbox directly to my PC. Or am I required to go through a router?

[undinism]

you can link an xbox directly to the pc by using a crossover cable to connect the xbox to whatever network card in your computer