Topic: Old Box With Evolution X - 3935 - Upgrade? (Read 179 times)

Heimdall · « **on:** February 24, 2012, 04:21:00 PM »

UnleashX or XBMC are newer. Only XBMC is still being developed.

Left Trigger + Right Trigger + back + black will quit the game.

Before doing any dash upgrade you need to know how the Xbox is modded - or is this why you randomly chose to post in TSOP flashing section?

Heimdall · « **Reply #1 on:** February 24, 2012, 04:28:00 PM »

Which softmod did your friend install?

You won't get any links here - it's against the rules. Google will help you find Enigmah, but let's take this one step at a time!

Heimdall · « **Reply #2 on:** February 24, 2012, 04:44:00 PM »

No. I mean SID or Krayzie, and which version.

If your friend doesn't know then the first place to start is with a softmod upgrade.

Heimdall · « **Reply #3 on:** February 24, 2012, 05:02:00 PM »

Forget it.

8 years ago, and you have a really old softmod.

Google "Heimdall's Xbox Engineering Disc". Burn to DVD-R at 4x or slower, and boot the Xbox with it in the DVD drive. LED turns red, 40 seconds later the menu appears. Select option 2.2.x to install a new, clean softmod - pick the one that fits your region plus any exploitable game you might have, but if you don't have an exploitable game the pick Splinter Cell (and don't worry - you don't need a copy of the game, it's just a useful back door).

If you want to try XBMC, boot with HeXEn again, and select option 4.1. - Install XBMC to E. It's not the latest XBMC, but if you like it - and I'm sure you will - I can talk you through updating to the latest version.

Edit: And HeXEn has Enigmah on it, for when you want to enable NTSC so you can get HD output.

Heimdall · « **Reply #4 on:** February 25, 2012, 11:32:00 AM »

You don't install HeXEn, you use HeXEn to install other things, and to alter the setup on your Xbox.

You don't install "enable HD".

So, can you explain what you did, and what error messages you get, and at what point in the installation / setup?

Heimdall · « **Reply #5 on:** February 25, 2012, 11:38:00 AM »

Useless.

Which options did you select, in what order, and when EXACTLY did you get the error message, and what was the error message?

Heimdall · « **Reply #6 on:** February 25, 2012, 12:05:00 PM »

Which option 2.2.x? 2.2.4, or 2.2.7? Is your TV PAL, or NTSC?

Start again. Once you've modded the Xbox from scratch (HeXEn Option 2.2.x, where x is either 4 or 7, and remember which it is) remove HeXEn, reboot, and make sure the Xbox will boot properly to UnleashX.

Then reboot with HeXEn, install XBMC to E (Option 4.1). Reboot without HeXEn, and make sure you can run XBMC.

Reboot with HeXEn again. Select "Option 1. NTSC-PAL Video Mode Switch", and switch your Xbox to NTSC. Remove HeXEn, reboot and make sure you can see your screen.

Plug in your component cable. Reboot with HeXEn and select "6.2. HD Enable - Krayzie 1.1.1 Softmod". Follow the instructions. If you get an error, write down EXACTLY what the error message is, and what happened immediately before the error message.

Hawk321 · « **Reply #7 on:** February 25, 2012, 12:36:00 PM »

Well, I booted from the DVD and then I installed 2.2.4 (PAL SC).

I went back to the main menue and there where 3 options 1 was to backup the eprom an other on install something (dont remember). I did nothing and did a hard-reboot without the DVD.

Now is there the original Xbox menue O_o and it doesnt read the DVD anymore.

But I have the original Splinter Cell DVD here.

Heimdall · « **Reply #8 on:** February 25, 2012, 01:32:00 PM »

Where in the instructions did it tell you to reboot after backing up the eeprom? You backup the eeprom, then select "Basic Install, UnleashX Dashboard", because you want to install the softmod......

Load Splinter Cell, load the gamesave, install the softmod from scratch.

shambles1980 · « **Reply #9 on:** February 25, 2012, 09:04:00 PM »

lol...

Sorry but Lol.

You would do well to fully follow every little step exactly as told by heimdall..

Il give you a summary of what hes telling you so you understand why hes telling you these things..

When you have a softmod from a game exploit it is usualy old. So we update them.
You use the hexen disk to Update the softmod, it does this by 1st deleting the old softmod then installing the new one to do this you 1st select the option in hexen, it then does its thing and makes you back up your eeprom. when its gone to the next screen you select the back up eeprom option again and it will say "Backing up eeprom

" then you use the back to settings menu option and you will see a "basic install Unleash-x or similar option" that will then install the updated soft mod for you and make you a nice safe shadow c.

After you have done that You can then go back to hexen and use the hexen options to change your display settings to ntsc. you simply press a or b like the thing tells you. then restart. if you can display ntsc on your tv when you restart the picture will be good so you can then go back to hexen and enable the hd video modes..

Now thats the basic version.
if you want to be able to do it you need to read carfully what your told and do it exactly like told.
Any time you think Hmm.. im stuck, il just reboot.. say "WAIT STOP, did the instructions tell me to reboot here?? I better go double check them. and if they seem unclear I should ask a question and get an answer before rebooting"

Good luck.

and have fun heimdall. Il be here chuckeling in the shaddows.

xboxmods2977 · « **Reply #10 on:** February 25, 2012, 10:47:00 PM »

QUOTE(shambles1980 @ Feb 26 2012, 05:04 AM)

Il be here chuckeling in the shaddows.

Me too.

Hawk321 · « **Reply #11 on:** February 29, 2012, 04:49:00 AM »

Everything is working fine now.

Author Topic: Old Box With Evolution X - 3935 - Upgrade? (Read 179 times)