xboxscene.org forums

Author Topic: Frag After Soldering Write Points On V1.3 Xbox  (Read 134 times)

xboxmods2977

  • Recovered User
  • Hero Member
  • *
  • Posts: 733
Frag After Soldering Write Points On V1.3 Xbox
« on: February 16, 2011, 07:16:00 AM »
Using the TSOP for a 29-wire isn't a bad idea. As anyone ever thought of converting a working xbox motherboard into a "bed of nails" type thing? It could then be used to re-flash other boards with bad TSOP's. It would be a very tough project, but awesome in the end.
Logged

uglyoldbob

  • Archived User
  • Newbie
  • *
  • Posts: 1
Frag After Soldering Write Points On V1.3 Xbox
« Reply #1 on: February 16, 2011, 11:28:00 AM »
Ok I have verified connectivity with a multi-meter on every pin except number 32, which is labeled as OUTPUT ENABLE. I don't see any pins listed for the 29 wire mods that would translate to this pin.

Has the layout of the motherboard changed between 1.3 and 1.4? I have a working 1.4 board to compare to.
EDIT: Ok nevermind, the 1.4 xbox I just bought yesterday also FRAGS and has not been modified at all.  mad.gif

The other thing to do is to take the board and do some tests with a logic analyzer at school.
Logged