xboxscene.org forums

Author Topic: Tsop Flashing Help On A 1.4  (Read 91 times)

GoTeamScotch

  • Recovered User
  • Sr. Member
  • *
  • Posts: 311
Tsop Flashing Help On A 1.4
« on: June 05, 2010, 03:50:00 AM »

So its been a while since I've done a TSOP flash apparently. . .

I hit a wall and am just stumped here as to what I am doing wrong. I have a 1.4 Xbox with the proper points bridged. I have tried using several variations of guides and all-in-one packages as well as using individual packages from xbins to no avail. The problem I'm getting is not that raincoat doesn't recognise my Winbond W49F020T-90B chip or anything like that, its that raincoat is freezing every time I try and run it. I've tried using splinter cell to boot it up and just plain ol' navigating to the proper xbe and running it. I've used several raincoat packages I've come across and it makes no difference. I try and run raincoat on my xbox and I see the little Linux penguin and then nothing happens after that. I try telnet'ing in but its no use. All the files appear to be in the right directories (usually UDATA/21585554/000000000000/raincoat). I've checked my bridge points and even if they were done wrong, raincoat should still at least try and load right?


Also, do I have to use a gamesave method? I already have XBMC running, can I just navigate to a XBE and run it? It seems as if every tutorial I've read requires a exploit.
Also, I am FTP'ing instead of using two xboxes and memory cards, does this matter?
Do I need to edit raincoat.conf? I'm using 0.7 so it should be all set already.

Please help, what am I doing wrong here?
Logged

steveo1978

  • Recovered User
  • Hero Member
  • *
  • Posts: 998
Tsop Flashing Help On A 1.4
« Reply #1 on: June 05, 2010, 09:51:00 PM »

I have flashed a Winbond using a save and just using a file browser to launch it. It worked very good for me. I think it was a splinter cell eurasia or raincoat combo thing. I have it on a memory card but I have no xbox to run it on and see what all it is. I now it came with a evox bios with the save that was simple named bios.bin and once you launch the xbe it loaded and flashed the tsop in about 5 to 10 seconds. I also swapped out the bios and flashed ind-bios to the tsop and that worked very easy to. I was thinking of ading some stuff to krazies ndure installer and having it as an all-in-one type thing but money got short and had to sell my xbox before I could get the save finished. I got the save off xbins if that helps either of you.
Logged