xboxscene.org forums

Author Topic: Slayers 2.6 Tsop Flash 1.0  (Read 85 times)

(o Y o)

  • Archived User
  • Newbie
  • *
  • Posts: 14
Slayers 2.6 Tsop Flash 1.0
« on: January 26, 2010, 11:40:00 AM »
I'm in a bit of a hole here, searched around and didn't find anything. I'm about to TSOP flash my 1.0 XBOX through slayers disk, there's a bunch of bios options. I was looking to flash x2 4983 and the option says "FLASH 1.0 - 1.5 XBOX WITH W/ X2-4983.06". Is that a good bios to use? Also I understand that the 1.0 xboxes use a 1024kb flash unlike the 1.2-1.5 which use 256k. so i'm pretty confused as the option says to flash 1.0-1.5 boxes? i checked in the D drive through FlashFXP and all I see are 256k bioses.
Logged

(o Y o)

  • Archived User
  • Newbie
  • *
  • Posts: 14
Slayers 2.6 Tsop Flash 1.0
« Reply #1 on: January 26, 2010, 12:11:00 PM »
okay, after some exensive searching it seems Slayers 2.6 (EvoX 3935) converts the bios automatically to 1MB. now during the flash i get this message "error reading bios file" I have a hynix TSOP.
Logged

steveo1978

  • Recovered User
  • Hero Member
  • *
  • Posts: 998
Slayers 2.6 Tsop Flash 1.0
« Reply #2 on: January 26, 2010, 12:29:00 PM »
I have had that problem to. It is most likely slayers isnt reading the bios look it should what you can do is install evox as a dash then create a folder inside the evox folder called bios. Then just put what ever bios you wanna flash in that folder. The TSOP you have can be flashed with any method you wanna use. I never trusted slayers to flash a bios.
Logged