Topic: Xbox Bios 1.4 X2-4981 Tsop No Dvd Drive Slow Boot (Read 142 times)

KboxMod · « **on:** October 18, 2009, 04:46:00 PM »

Hey Guys,

Here is what I have:
- Xbox1 v1.4
- TSOP Bios flashed with x2 4981 using raincoat 0.7
- Hard drive upgraded to larger 2.5' laptop hard drive using slayers disk 2.7

Here is the issue I am having:

My plan is to build it into a slimbox and use it as a media center and that is why I flashed it with x2 4981 bios bc it has the option to skip the dvd drive check on boot-up, which it does, but it takes it a really long time to boot up. It sits on the "X" logo screen for a long time, then the xecuter2 word comes up, then the screen goes blank for about 30sec, then the dash finally loads.

I was wondering if there is anything I can do to make it boot faster with the dvd drive out or a different 256k bios I should be using that works better

Thanks for you help!

rfisher1968 · « **Reply #1 on:** October 18, 2009, 05:16:00 PM »

Try using X2 5035, I don't know whats different, But I'm using it on console without a DVD Drive and don't have the delay you are experiencing. Also, i don't know if X2 5035 is available in 256K.

KboxMod · « **Reply #2 on:** October 18, 2009, 05:32:00 PM »

Do you know what version xbox you have? I have 1.4, does the x2-5035 work on the v1.4? Does v1.4 need to use a 256k bios or not?

Thanks!

Heimdall · « **Reply #3 on:** October 18, 2009, 05:35:00 PM »

X2.5035 is 512k, so it won't fit on a 1.4 TSOP, which needs a 256k BIOS. Try iND-BIOS.5003 instead - it's just as configurable, but it's only 256k.

Heimdall · « **Reply #4 on:** October 18, 2009, 06:05:00 PM »

Depends. So long as you DON'T have a Winbond TSOP chip you can just use Evox (either as an application or as your dash) to flash the BIOS. If you have a Winbond then you need to run a Raincoat based flasher, as you described.

Heimdall · « **Reply #5 on:** October 18, 2009, 06:40:00 PM »

You can open the Xbox, or try flashing with Evox and see if it identifies the chip as a Winond then gives you an error.

According to your first post your Xbox isn't softmodded, it's TSOP flashed......

Yes, HeXEn works on softmod, TSOP (including Winbond) and chipped Xboxes.

KboxMod · « **Reply #6 on:** October 18, 2009, 07:53:00 PM »

The ND-BIOS.5003 doesn't seem to want to boot with the dvd drive out. Is there a setting in there that I am missing? I got it set up so that it would boot the dash I would want to boot and have the config file in the c drive and injected it, but without the dvd drive it says "loading ind bios" then goes blank and does nothing.

Ok so it finally loaded. I guess it took about the same amount of time as with the x2 bios, but the blank screen was longer. I guess the long boot will be something I will have to deal with unless anyone else has any other ideas on what might be causing it.

I do have a winbond chip.

Thanks for all your help!

Author Topic: Xbox Bios 1.4 X2-4981 Tsop No Dvd Drive Slow Boot (Read 142 times)