Topic: How Do I Flash Winbond W49f020? (Read 66 times)

xeeeon · « **on:** November 18, 2007, 02:46:00 PM »

I have soldered the write points, its a 1.2 - 1.5 xbox, and evox says flash type unknown or unknown flash type.
I tried x flash, but it asks if I soldered the write points properly. Grr.
Any other ideas of a program to use to flash this chip.
If you recommend raincoat, i will need an explanation, as the file I got off xbins, doesnt have any xbe's.
Thanks

bsbllmvp05 · « **Reply #1 on:** November 18, 2007, 08:04:00 PM »

to flash a windbond you are going to either need to use raincoat inside linux or the eurasia Cd
evox cannot flash the winbond tsop's

xeeeon · « **Reply #2 on:** November 19, 2007, 12:05:00 AM »

Thanks for your reply I will try the eurasia disk.

xeeeon · « **Reply #3 on:** November 19, 2007, 04:20:00 AM »

Thanks again, this worked I used the eurasia disk.

bsbllmvp05 · « **Reply #4 on:** November 19, 2007, 03:32:00 PM »

no problem.
i went through the same thing with my winbond.

Author Topic: How Do I Flash Winbond W49f020? (Read 66 times)