xboxscene.org forums

Pages: 1 [2]

Author Topic: Nms Tsop Flasher 2.0  (Read 162 times)

FuzzBallz

  • Archived User
  • Newbie
  • *
  • Posts: 18
Nms Tsop Flasher 2.0
« Reply #15 on: October 07, 2006, 11:11:00 AM »
First time i have flashed TSOP. I used this, worked wonderfully. All ready has my preferred BIOS in it too smile.gif
You might want to update your pictures of XBMC, as it's in version 2.0 now?
Not a big deal.

Anyways,
Thanks for a great tutorial!
Logged

dring219

  • Archived User
  • Newbie
  • *
  • Posts: 19
Nms Tsop Flasher 2.0
« Reply #16 on: October 11, 2006, 08:44:00 PM »
any way to inject raincoat .7 into this flasher ? Got another v1.3 box with a winbond chip that won't flash ...

Thanks
Logged

Movax

  • Recovered User
  • Hero Member
  • *
  • Posts: 611
Nms Tsop Flasher 2.0
« Reply #17 on: October 13, 2006, 04:36:00 AM »
Edit: OMG wrong thread smile.gif
Logged

sidocious

  • Archived User
  • Newbie
  • *
  • Posts: 16
Nms Tsop Flasher 2.0
« Reply #18 on: October 15, 2006, 12:38:00 AM »
I do not found it on xbins :/
any other place, where I can get it? smile.gif
Logged

VerbalVenom

  • Archived User
  • Sr. Member
  • *
  • Posts: 288
Nms Tsop Flasher 2.0
« Reply #19 on: October 19, 2006, 06:07:00 AM »
So wait.... this uses raincoat 0.5? I've been trying to flash my winbond chip and I keep getting errors. I was told raincoad .7 is the only raincoat that works with winbonds, and assumed this came with it. Does it or no?
Logged

cobrin

  • Archived User
  • Full Member
  • *
  • Posts: 109
Nms Tsop Flasher 2.0
« Reply #20 on: October 19, 2006, 07:51:00 AM »
NO NO NO....... If you have a winbond chip I have only eva used Raincoat 0.7 and James Bond 007 that is exploitable.

make sure that the game save is on the HDD of the xbox. By the sound of your other posts you are almost there. Are you following the commands in DOS correctly?

Hope it helps
Logged

VerbalVenom

  • Archived User
  • Sr. Member
  • *
  • Posts: 288
Nms Tsop Flasher 2.0
« Reply #21 on: October 19, 2006, 08:46:00 AM »
If you're talking to me, I've only tried NMS sad.gif. I keep getting write enabled errors and i've soldered the points at least 5 times. Just now I did a wire install on them and tested with a multimeter and they're connected, so i shouldn't have any errors. As far as trying straight through Raincoat i've yet to do it. I gave up on NMS and I put the exploit saves on the drive. Now I have to freeze the xbox for 30 mins then try to flash before the tsop comas or freezes. THat's the only thing i'm scared of is the xbox locking up as im flashing...
Logged

VerbalVenom

  • Archived User
  • Sr. Member
  • *
  • Posts: 288
Nms Tsop Flasher 2.0
« Reply #22 on: October 19, 2006, 10:37:00 AM »
Update- I put the xbox in the freezer for an hour, took it out and went to boot the Flash Utility. It loads, and I get the evox splash screen, and it never goes into Raincoat. It freezes up at the Evolutionx splash. I tried booting twice to no avail.
Logged

FuzzBallz

  • Archived User
  • Newbie
  • *
  • Posts: 18
Nms Tsop Flasher 2.0
« Reply #23 on: October 19, 2006, 07:20:00 PM »
You put the whole xbox in the freezer?

I've done this with dead HDD to recover data before, never heard of someone sticking a whole pc/xbox in the freezer though.
Logged

VerbalVenom

  • Archived User
  • Sr. Member
  • *
  • Posts: 288
Nms Tsop Flasher 2.0
« Reply #24 on: October 20, 2006, 04:59:00 AM »
QUOTE(FuzzBallz @ Oct 19 2006, 09:27 PM) View Post

You put the whole xbox in the freezer?

I've done this with dead HDD to recover data before, never heard of someone sticking a whole pc/xbox in the freezer though.


Yea, it sounds weird and even I was skeptical but trust me it works. If you have a coma TSOP, and you put the xbox in the freezer for 30-45 minutes chances are it'll work when it comes out. So basically I need to put it in the freezer for an hour then take it out to try to flash the tsop, but it keeps freezing at the evox splash screen in raincoat. If anyone can help me i'd be extremely grateful.
Logged

frobnitzz

  • Archived User
  • Newbie
  • *
  • Posts: 24
Nms Tsop Flasher 2.0
« Reply #25 on: October 22, 2006, 09:25:00 AM »
hmm, having problems - hoping it's something simple.

1.3 xbox.

Using the 256k X2 4981.06.bin bios file found in the NMS TSOP Flasher 2.0 package (from xbins). I renamed it to bios.bin and copied it to:

>NMS TSOP Flasher 2.0\Exploit\Saves\TSOP Flasher\UDATA\21585554\000000000000\Flasher\bios\bios.bin

and

>NMS TSOP Flasher 2.0\Exploit\Saves\TSOP Flasher\UDATA\21585554\000000000000\Raincoat\bios.bin (overwriting the existing bios.bin).

Transfered that lot to my modified xbox, on to the mem card. Then from mem card to unmodified HD.

Ran 007, loaded save game. Got the NMS flasher screen, chose flash etc. Penguin appears, loads of text.. then it says flash failed check log file for details.

So, if it's not obvious what the problem is - how/where do I read the log file?

Thanks!



Logged

frobnitzz

  • Archived User
  • Newbie
  • *
  • Posts: 24
Nms Tsop Flasher 2.0
« Reply #26 on: October 24, 2006, 04:22:00 AM »
Has anyone managed to get raincoat 0.7 going with this - I've copied the relevent files in to where they appear to be required yet it still insists on loading raincoat 0.5

Not only that it never finds the raincoat.conf file - it's there though!!?

 blink.gif
Logged

frobnitzz

  • Archived User
  • Newbie
  • *
  • Posts: 24
Nms Tsop Flasher 2.0
« Reply #27 on: October 27, 2006, 09:20:00 AM »
anyone?  unsure.gif
Logged

sidocious

  • Archived User
  • Newbie
  • *
  • Posts: 16
Nms Tsop Flasher 2.0
« Reply #28 on: October 28, 2006, 01:33:00 AM »
raincoat.conf = raincoat.cfg and my config is:
flash = 0x01d5,"AMD - Am29F080B",0x100000;
flash = 0x04d5,"FUJITSU - MBM29F080A",0x100000;
flash = 0xadd5,"Hynix - HY29F080",0x100000;
flash = 0x20f1,"ST - M29F080A",0x100000;
flash = 0xbf61,"SST - 49LF020",0x40000;
flash = 0xbf52,"SST - 49LF020A",0x40000;
flash = 0xbf57,"SST - 49LF002B",0x40000;
flash = 0x89a6,"Sharp LHF08CH1",0x100000;
flash = 0xda8c,"Winbond W49F020",0x40000;
flash = 0x01a4,"AMD - Am29F040B",0x80000;
flash = 0xda0b,"Winbond - W49F002U",0x40000;
flash = 0xc236,"MACRONIX - MX29F022NTPC",0x40000;
flash = 0x20b0,"ST M29f002BT",0x40000;
flash = 0x01da,"AMD - Am29LV800B",0x100000;
flash = 0x04a4,"FUJITSU - MBM29F040C",0x80000;
flash = 0xadb0,"Hynix - HY29F002TT-90",0x40000;
flash = 0xdab0,"Winbond - W49V002A",0x40000;

it is working all time, when I use it.
hope it is help smile.gif
Logged

ls2k

  • Archived User
  • Newbie
  • *
  • Posts: 2
Nms Tsop Flasher 2.0
« Reply #29 on: December 10, 2006, 02:09:00 AM »
QUOTE(VerbalVenom @ Oct 20 2006, 12:06 PM) View Post

Yea, it sounds weird and even I was skeptical but trust me it works. If you have a coma TSOP, and you put the xbox in the freezer for 30-45 minutes chances are it'll work when it comes out. So basically I need to put it in the freezer for an hour then take it out to try to flash the tsop, but it keeps freezing at the evox splash screen in raincoat. If anyone can help me i'd be extremely grateful.



Its true I got my 1.4 coma console to boot 3 times by cooling the tsop I didn't freeze the whole box, put an ice cube in a plastic bag and held it onto the winbond chip.  The first 2 times I didn't have write-enables points proper but 3rd time lucky loaded splintercell + raincoat flashed and its all good.  It booted everytime with the ice cube not once with out.
Logged
Pages: 1 [2]
« previous next »