Topic: 1.0 Comma Fixed But.... (Read 88 times)

airviper127 · « **on:** June 17, 2006, 12:05:00 AM »

just looking to know if i can flash the tsop the standard way or if i need to take of the jumper wire from the comma fix i had to do on it.

airviper127 · « **Reply #1 on:** June 17, 2006, 11:04:00 AM »

well yes the comma situation came up and i found the repair tut on llamas and i fixed it...so the wire is still there.

would i need to take it out to flash the tsop????also 1.0 needs 1mb bios.....but with the bridge for the comma would that make it need a different size bios???

Thanks for the help!

airviper127 · « **Reply #2 on:** June 17, 2006, 04:11:00 PM »

what size would it need to be if i dont cut the wire?

??if i cut the wire it wont boot....unless i cut, strip, and twist it to get it to boot then flash

lordvader129 · « **Reply #3 on:** June 17, 2006, 04:57:00 PM »

QUOTE(airviper127 @ Jun 17 2006, 06:18 PM)

what size would it need to be if i dont cut the wire?

??if i cut the wire it wont boot....unless i cut, strip, and twist it to get it to boot then flash

boot, load eurasia, cut wire, flash 1mb bios

if you dont want to cut the wire you can still use 1mb, and it will only flash 256k or 512k of it (make sure you are using a 256k x4 image)

airviper127 · « **Reply #4 on:** June 17, 2006, 06:36:00 PM »

QUOTE

(make sure you are using a 256k x4 image)

do you mean use, for example bios 4981 which is 256 then use xbtool to make it 1 mb and it will work without snipping the wire?

caster420 · « **Reply #5 on:** June 17, 2006, 08:03:00 PM »

QUOTE(airviper127 @ Jun 17 2006, 08:43 PM)

do you mean use, for example bios 4981 which is 256 then use xbtool to make it 1 mb and it will work without snipping the wire?

Yup - should be fine.

Caster.

Author Topic: 1.0 Comma Fixed But.... (Read 88 times)