Topic: A Few Tsop Questions (Read 282 times)

manxbox44 · « **on:** October 12, 2005, 12:08:00 PM »

ok i have a 1.0 xbox with a Hynix tsop in it. i plan to use the 007. now what i'm wondering is would it easier for me to flash it using raincoat or evox(and by evox i mean i can flash it with slayers disc)?

also could someone link me to a guide that shows me how to do it with evox.

thanks

lordvader129 · « **Reply #1 on:** October 12, 2005, 12:46:00 PM »

since your already planning on use 007 just use the 007evox installer rather than slayers

as for a guide, once evox is loaded just select "flash bios" from the menu, after soldering write enable points of course

manxbox44 · « **Reply #2 on:** October 12, 2005, 02:03:00 PM »

QUOTE(lordvader129 @ Oct 12 2005, 08:57 PM)

since your already planning on use 007 just use the 007evox installer rather than slayers

EverestX · « **Reply #3 on:** October 12, 2005, 02:06:00 PM »

YOu can get he exploit from the Ususal places usually found in the link in my sig....

manxbox44 · « **Reply #4 on:** October 12, 2005, 02:19:00 PM »

QUOTE(FiReMuNkEy @ Oct 12 2005, 10:25 PM)

If you have already soldered your write points and have a slayers disk already just use that...

lordvader129 · « **Reply #5 on:** October 12, 2005, 02:40:00 PM »

QUOTE(manxbox44 @ Oct 12 2005, 03:30 PM)

i have done that already but how would i go about doing it with slayers disc?

manxbox44 · « **Reply #6 on:** October 12, 2005, 03:01:00 PM »

QUOTE(lordvader129 @ Oct 12 2005, 10:51 PM)

same way i said, boot and select flash bios, of course to boot slayers you need a way to load unsigned code, which usually means exploit, which i why i say just use an evox exploit to save a step

lordvader129 · « **Reply #7 on:** October 12, 2005, 03:03:00 PM »

yeah, just put it in the bios folder of th eexploit, you dont need to resize evox will automaticlaly size it to fill your TSOP

manxbox44 · « **Reply #8 on:** October 12, 2005, 03:29:00 PM »

QUOTE(lordvader129 @ Oct 12 2005, 11:14 PM)

yeah, just put it in the bios folder of th eexploit, you dont need to resize evox will automaticlaly size it to fill your TSOP

lordvader129 · « **Reply #9 on:** October 12, 2005, 04:19:00 PM »

i dont think it has the newest version but the version it does have will autoresize (the newest 2 versions autoresize)

manxbox44 · « **Reply #10 on:** October 12, 2005, 05:08:00 PM »

QUOTE(lordvader129 @ Oct 13 2005, 12:30 AM)

i dont think it has the newest version but the version it does have will autoresize (the newest 2 versions autoresize)

lordvader129 · « **Reply #11 on:** October 12, 2005, 05:27:00 PM »

no th ebios can be named whatever you want, neither evox nor the bios itself cares

manxbox44 · « **Reply #12 on:** October 12, 2005, 05:38:00 PM »

QUOTE(lordvader129 @ Oct 13 2005, 01:38 AM)

no th ebios can be named whatever you want, neither evox nor the bios itself cares

manxbox44 · « **Reply #13 on:** October 13, 2005, 10:30:00 AM »

lordvader129

ok just want to double check this the retail kernels that i have is 4034 so that means i have a 1.0 and it also had a sticker on the board that says k 4034. so this means that i have a 1.0 box right?

and i solder these two points right?
in this link for the 1.0 board
http://forums.xbox-s...howtopic=233352

lordvader129 · « **Reply #14 on:** October 13, 2005, 10:34:00 AM »

yep and yep

Author Topic: A Few Tsop Questions (Read 282 times)