xboxscene.org forums

Author Topic: Fix A Bad Flash On A 1.2-1.5 Tsop?  (Read 135 times)

acemilo

  • Archived User
  • Hero Member
  • *
  • Posts: 910
Fix A Bad Flash On A 1.2-1.5 Tsop?
« on: September 13, 2005, 11:53:00 PM »
No, the only way to fix with an lpc mod is if you have a 1.0/1.1 and a cheapmod based chip and part of the tsop has to be there, and you have to have excellent timing.  Otherwise, 29 wire is your only way.
Logged

blagmaster

  • Archived User
  • Sr. Member
  • *
  • Posts: 256
Fix A Bad Flash On A 1.2-1.5 Tsop?
« Reply #1 on: September 14, 2005, 12:17:00 AM »
get a Duox2
Logged

solder_blob

  • Archived User
  • Jr. Member
  • *
  • Posts: 51
Fix A Bad Flash On A 1.2-1.5 Tsop?
« Reply #2 on: September 14, 2005, 12:28:00 AM »
QUOTE(acemilo @ Sep 14 2005, 02:04 AM)
No, the only way to fix with an lpc mod is if you have a 1.0/1.1 and a cheapmod based chip and part of the tsop has to be there, and you have to have excellent timing.  Otherwise, 29 wire is your only way.
Logged

bucko

  • Recovered User
  • Hero Member
  • *
  • Posts: 4255
Fix A Bad Flash On A 1.2-1.5 Tsop?
« Reply #3 on: September 14, 2005, 02:08:00 AM »
Only 29 wire homebrew can flash/fix TSOP check out the Xray mod chip I think it's called.
Logged

lordvader129

  • Archived User
  • Hero Member
  • *
  • Posts: 5860
Fix A Bad Flash On A 1.2-1.5 Tsop?
« Reply #4 on: September 14, 2005, 07:54:00 AM »
QUOTE(solder_blob @ Sep 14 2005, 02:39 AM)
Damn... why 29 wires??!!!  What do they all connect to??
Logged

blagmaster

  • Archived User
  • Sr. Member
  • *
  • Posts: 256
Fix A Bad Flash On A 1.2-1.5 Tsop?
« Reply #5 on: September 14, 2005, 08:26:00 AM »
So just put in a Duox2, flash msbios to the one bank and x2 5035 to the other.

This doesnt fix the problem, just bypasses it. But it works and yo ucan go on live.

Logged

lordvader129

  • Archived User
  • Hero Member
  • *
  • Posts: 5860
Fix A Bad Flash On A 1.2-1.5 Tsop?
« Reply #6 on: September 14, 2005, 09:10:00 AM »
flash the evox TSOP d.6 bios (i cant even tell you where to find this bios anymore though) to the spiderchip (make sure you have a way to reflash later, either by chip hotswap or programmer)

then boot, and about one half second after turning the xbox on pull d0 off of ground, if done perfectly, and the TSOP has a some speck of valid code on it, the xbox will boot and allow you to load evox or slayers and reflash the TSOP (i would put a eurasia flashdisc in the dvd drive and leave it there through the whole attempt, that way if it does boot it will load right into the flasher)
Logged

lordvader129

  • Archived User
  • Hero Member
  • *
  • Posts: 5860
Fix A Bad Flash On A 1.2-1.5 Tsop?
« Reply #7 on: September 14, 2005, 11:40:00 AM »
no, you need the special bios, and the only place i knew to get it was packed with the evox 3021 dashbaord, but now xbins no longer hosts evox and evox only hosts the new(er) 3935 dash

theres no way to just boot and turn the chip off, if it were that simple why wouldanyone bother with a 29 wire fix? lol, the TSOP bio somehow loads itself into memory, then recalls the bios afterward, since d0 is only utilized in the first half second or so of bootup you need to load the TSOP bios from LPC (d0 grounded) then when it recalls the bios half a second later you must have d0 disconnected to it looks to the TSOP
Logged

Exobex

  • Archived User
  • Hero Member
  • *
  • Posts: 1093
Fix A Bad Flash On A 1.2-1.5 Tsop?
« Reply #8 on: October 03, 2005, 06:01:00 PM »
rotfl.gif
Logged

lordvader129

  • Archived User
  • Hero Member
  • *
  • Posts: 5860
Fix A Bad Flash On A 1.2-1.5 Tsop?
« Reply #9 on: October 03, 2005, 06:16:00 PM »
look sliek the kissed and made up, seems they started hosting evox again on the 19th

just double checked, EvolutionX_Build_3921.rar does have the tsop d.6 bios with it for anyone who needs it
Logged