Topic: New To This, For Tsop Flash I Have To Solder (Read 562 times)

lordvader129 · « **Reply #15 on:** September 03, 2005, 01:21:00 PM »

QUOTE(tryintomod @ Sep 3 2005, 03:02 PM)

I think this is correct. Would I use "Item "Flash BIOS",ID_Flash_Bios" Since I don't want the evox bios. If so then where would I place the bios in order for that option to work. Thanks

tryintomod · « **Reply #16 on:** September 03, 2005, 01:34:00 PM »

Ok I think I know how to flash it now and get the save on the hdd and unlock the tsop by jumping the points and all that. Here is what else I would like to do though. I would like to make it so I can play live. In order to do this I need to split the tsop 2 ways. I have a 1.0v so this can be done correct? I have seen the diagram in your sig. So if I split the tsop then I would have two banks of 512mb, correct? Therefore I need to make my choice of bios a 512 bios using xbtool, Correct? Also I would like an oringal bios on the tsop so that I can play live. I do need this, right. Can i backup my original bios from the tsop and resize them? probably not but thought I would ask. Is there a 512 M$ bios out there? Basically how would I go about putting bios on the other half of my tsop that would allow me to be on live? Thanks

To play live do I need to have the original hdd running on the xbox or can I have the upgraded one running.

lordvader129 · « **Reply #17 on:** September 03, 2005, 01:42:00 PM »

QUOTE(tryintomod @ Sep 3 2005, 03:45 PM)

Ok I think I know how to flash it now and get the save on the hdd and unlock the tsop by jumping the points and all that. Here is what else I would like to do though. I would like to make it so I can play live. In order to do this I need to split the tsop 2 ways. I have a 1.0v so this can be done correct? I have seen the diagram in your sig. So if I split the tsop then I would have two banks of 512mb, correct? Therefore I need to make my choice of bios a 512 bios using xbtool, Correct? Also I would like an oringal bios on the tsop so that I can play live. I do need this, right. Can i backup my original bios from the tsop and resize them? probably not but thought I would ask. Is there a 512 M$ bios out there? Basically how would I go about putting bios on the other half of my tsop that would allow me to be on live? Thanks

tryintomod · « **Reply #18 on:** September 03, 2005, 01:47:00 PM »

ok so i install the switch and does it matter which way the switch is turned when i flash my hacked bios (x2). Evox will resize the bios for me to the correct size? When I do this will it leave the oringinal M$ bios on the other bank of the tsop?

lordvader129 · « **Reply #19 on:** September 03, 2005, 01:50:00 PM »

QUOTE(tryintomod @ Sep 3 2005, 03:58 PM)

ok so i install the switch and does it matter which way the switch is turned when i flash my hacked bios (x2). Evox will resize the bios for me to the correct size? When I do this will it leave the oringinal M$ bios on the other bank of the tsop?

tryintomod · « **Reply #20 on:** September 03, 2005, 01:56:00 PM »

Well I know that one side will have the x2 bios running and one will have the original bios. But does it matter initially which way the switch is when I flash. Does it matter what side i flash with the hacked bios.

Also you said that my unmodded hdd is locked to that specific xbox. So i can't put it in my modded xbox with the xenium chip and then then insert my evox boot disc and ftp my save.

lordvader129 · « **Reply #21 on:** September 03, 2005, 02:04:00 PM »

QUOTE(tryintomod @ Sep 3 2005, 04:07 PM)

Well I know that one side will have the x2 bios running and one will have the original bios. But does it matter initially which way the switch is when I flash. Does it matter what side i flash with the hacked bios.

tryintomod · « **Reply #22 on:** September 03, 2005, 02:10:00 PM »

Well it is solderless, but the lpc ports are filled with solder so that would really work and it's a pain in the ass to take my box apart. Here is a pic of it.

Front top view
Inside of top

There are about that many more wires underneath the trays in the xbox. There is somewhere between 250 and 300 ft or wire in the xbox all together.

lordvader129 · « **Reply #23 on:** September 03, 2005, 02:15:00 PM »

well solder itn eh LPC isnt a problem, yo umight have the hold the chip down while you boot, but since you really only need to boot once its not a big deal

but yeah, i wouldnt want to take thet beast apart either

id suggest just getting a memory card
http://www.ebgames.c...duct/224945.asp

tryintomod · « **Reply #24 on:** September 03, 2005, 02:24:00 PM »

ya I'm going to purchase a geniune MS xbox one off of ebay for like 15-20 brand new sealed.

tryintomod · « **Reply #25 on:** September 03, 2005, 03:26:00 PM »

Will an original geniune MS 8mb memory unit work for the exploit or would you recommend the madcatz. Thanks

lordvader129 · « **Reply #26 on:** September 03, 2005, 04:55:00 PM »

QUOTE(tryintomod @ Sep 3 2005, 05:37 PM)

Will an original geniune MS 8mb memory unit work for the exploit or would you recommend the madcatz. Thanks

tryintomod · « **Reply #27 on:** September 04, 2005, 01:31:00 PM »

Have you actually done a tsop flash by splitting it two way and using evox.

caster420 · « **Reply #28 on:** September 04, 2005, 01:34:00 PM »

Yuppers.

tryintomod · « **Reply #29 on:** September 04, 2005, 04:14:00 PM »

and did it work on the first try? Also to play live did you just load the original bios with the original hdd? Do you have any advice from experience. Anything I should be careful of or anything basically. Thanks... I just ordered my memory card to get the file on my hdd.

Author Topic: New To This, For Tsop Flash I Have To Solder (Read 562 times)