Print

[_InFeRnO_]

You will need to disable the chip in order to flash your TSOP.

[lordvader129]

well first off if your using a xenium you dont need xbedump

but dont get rid of it just yet, you have to boot with the xenium disabled (IE, select teh TSOP bios from the launch menu) so to load evox or raincoat youll need to use an exploit, just FTP a dashbaord exploit, then use the exploit to laod evox and flash (be sure you have your write enable points soldered too)

[lordvader129]

well if you boot from the xenium evox cant see the TSOP at all (the modchip bypasses it) so no, its not the same as an exploit

dashbaord xbox you shoudl rpoabbly use UXE, if you happen to have an exploitable game the gamesave exploits are good too

are you sure the points are bridged properly? its really impossible to tell without loading a flashing utility and trying to flash

[triforce]

What brand TSOP do you have?

[lordvader129]

QUOTE(wizer @ May 16 2005, 10:19 PM)

I checked continuity on points leading away from the bridges on either side  for both of them(if that just made any sense) . Would this be a false reading?

[acemilo]

^^ You need a 29 wire chip like the xray3 to repair the tsop, or just put the ms bios on the chip and you will be safe for live.

[lordvader129]

nhe doesnt need a 29 wire chip, he should be able to fix it with the three wire trick, assumign the 256k bios is a good flash

an in the future use raincoat .7, it will resize a biso to fit your chip

[acemilo]

^^ Good call, didn't catch that.  Now that I'm thinking, if the 3 wire trick doesn't work, you can also reflash it with a cheapmod based chip.  The 3 wire should work tho.