Topic: Never Done This Before. (Read 301 times)

pepsik · « **Reply #15 on:** February 11, 2005, 01:42:00 PM »

When you have the xenium installed, ftp the game save to the E:/UDATA. and you can bypass the memory card that way.

Martinchris23 · « **Reply #16 on:** February 11, 2005, 02:15:00 PM »

QUOTE(pepsik @ Feb 11 2005, 08:23 PM)

I think you misread my post.

esc1 · « **Reply #17 on:** February 11, 2005, 06:22:00 PM »

One of my good friends said he has done 9 tsop flashes through evox dash, so I dunno why you guys are recommending game save exploits.

pepsik · « **Reply #18 on:** February 11, 2005, 06:28:00 PM »

Martinchris23 · « **Reply #19 on:** February 11, 2005, 06:29:00 PM »

QUOTE(esc1 @ Feb 12 2005, 01:28 AM)

One of my good friends said he has done 9 tsop flashes through evox dash, so I dunno why you guys are recommending game save exploits.

jameswalter · « **Reply #20 on:** February 11, 2005, 07:29:00 PM »

QUOTE(esc1 @ Feb 11 2005, 04:28 PM)

One of my good friends said he has done 9 tsop flashes through evox dash, so I dunno why you guys are recommending game save exploits.

esc1 · « **Reply #21 on:** February 11, 2005, 10:41:00 PM »

jameswalter · « **Reply #22 on:** February 12, 2005, 01:04:00 AM »

Like everyone said you can't unlock the HD from another box in your box no matter what chip unless you have a EEPROM backup from the box it came from. The chip will only help you setup the new HD.

esc1 · « **Reply #23 on:** February 12, 2005, 01:36:00 AM »

I used slayers and tried raincoaters. Didn't work. My solder on the bottom was nice, but the top was a blob. LOL. I'm going to ratshack tomrrow to get some flux or solder remover.. whatever you call it.

jameswalter · « **Reply #24 on:** February 12, 2005, 01:42:00 AM »

QUOTE(esc1 @ Feb 11 2005, 11:42 PM)

I used slayers and tried raincoaters. Didn't work. My solder on the bottom was nice, but the top was a blob. LOL. I'm going to ratshack tomrrow to get some flux or solder remover.. whatever you call it.

FallsInc · « **Reply #25 on:** February 12, 2005, 03:06:00 AM »

this is not so hard at all...

install chip
install HD
boot slayers
format
install MS dash
reboot to XOS
lock HD
take out chip
bask in virgin xbox glory
load game save
boot game
open save
flash

or you can flash right from evox by renaming the xboxdash.xbe with the evox files from the game save, that will accomplish the same thing, only it will boot evox when its unmodded. find the flashing tsop with lpc modchip thread in the stickies.

you DONT need the old HD for anything... throw it out
you CANT flash the tsop from an lpc modchip
you SHOULD use XOS to lock the HD

Martinchris23 · « **Reply #26 on:** February 12, 2005, 04:06:00 AM »

QUOTE(UGCREBEL6 @ Feb 12 2005, 02:37 AM)

I know this ------> error 06 means that the hd is unlocked and the xbox can't recognize/load anything from it.... but taht might have already been established... i'm just giving my 2 cents on the help

Martinchris23 · « **Reply #27 on:** February 12, 2005, 04:11:00 AM »

QUOTE(FallsInc)

you CANT flash the tsop from an lpc modchip

You keep saying this although it's not true - why?

Martin

esc1 · « **Reply #28 on:** February 12, 2005, 11:27:00 AM »

QUOTE(jameswalter @ Feb 12 2005, 02:48 AM)

Explain what you are trying to do exactly...you do know you cant just stick slayers in when booting from the XIce chip and flash the TSOP right?

jameswalter · « **Reply #29 on:** February 12, 2005, 02:02:00 PM »

1st Upgrade to raincoat .7. What kind of TSOP do you have, is it a Winbond? 0x09 usually means bad solder points.

Edit: Your bios must be in the bios folder of the game exploit.

Author Topic: Never Done This Before. (Read 301 times)