Print

[manxbox44]

QUOTE (lordvader129 @ Dec 18 2004, 06:29 AM)

its fine the way it is, youll just have to use the command  if you rename it just make sure you use the right command when flashing

ok will do thanks

[manxbox44]

ok i have been reading alot of posteds and tutorials for a v1.2-1.5 i need to solder 3 points on the board and some say i only need to solder only two . which one is right and what i use? i'm am also reading that in alot of the version of raincoat that i need to add different commands to the raincoat.conf file. do i need to do all of this or has it all been add to raincoat 0.7? i have also heard that you can use the platinum version of 007 AUF but then some say you have to have the older version of 007 AUF to do it? i would be ever so greatful if someone can answer my question that i have.


thankyou

[lordvader129]

those are the 2 points you need for 1.2-1.5, top only, no need to take the board out



as for 007, there are actually 3 versions fo the game, original (non platinum), platinum 1, and platinum 2

the original version and platinum 1 work, platinum 2 (newer copies) has been patched so it wont load the hacked save

[manxbox44]

QUOTE (lordvader129 @ Dec 18 2004, 08:51 AM)

those are the 2 points you need for 1.2-1.5, top only, no need to take the board out as for 007, there are actually 3 versions fo the game, original (non platinum), platinum 1, and platinum 2 the original version and platinum 1 work, platinum 2 (newer copies) has been patched so it wont load the hacked save

ok thanks but i'm am also reading that in alot of the version of raincoat that i need to add different commands to the raincoat.conf file. do i need to do all of this or has it all been add to raincoat 0.7?

[lordvader129]

you will only need to add a command to raincoat .7 if you have an Atmel brand TSOP (i think these showed up on a few 1.4s)

i should just post an updated raincoat.conf for people to use

[manxbox44]

QUOTE (lordvader129 @ Dec 18 2004, 06:53 PM)

you will only need to add a command to raincoat .7 if you have an Atmel brand TSOP (i think these showed up on a few 1.4s) i should just post an updated raincoat.conf for people to use

thanks and it would be great if you would post a updated raincoat.conf for .7 to use

[manxbox44]

QUOTE (manxbox44 @ Dec 19 2004, 01:06 AM)

thanks and it would be great if you would post a updated raincoat.conf for .7 to use

ok from the looks of the pictures i have seen of already solder points it looks like they just heated up the solder and dipped it in the the to holes of each point and then put some in the middle of the two lil holes or did they heat up the ends of a small piece of soldier and connected the two points?

[lordvader129]

what i do is a get a small bead of solder on the iron, then touch the bead between the two points, and usually it sticks enough to bridge them, sometimes the points dont cooperate though

[manxbox44]

is there any way to tell which 007 platinum with out opening up the package?

[manxbox44]

QUOTE(manxbox44 @ Dec 19 2004, 11:39 PM)

is there any way to tell which 007 platinum with out opening up the package?

[lordvader129]

QUOTE(manxbox44 @ Dec 19 2004, 04:39 PM)

is there any way to tell which 007 platinum with out opening up the package?

[manxbox44]

QUOTE(lordvader129 @ Dec 22 2004, 12:12 AM)

i belive those same serial numbers are on the outside of the package, not sure where exactly, but i think the first shipment of the patched (non working) discs had the non-patched serials on the case, so the external ID isnt 100%

[manxbox44]

hey lordvader129

i have a 007 platinum version with the nunbers 1448521 on it. is there any way for that you can tell me if this will work? thanks

[lordvader129]

QUOTE(manxbox44 @ Dec 30 2004, 08:46 PM)

hey lordvader129

[manxbox44]

QUOTE(lordvader129 @ Dec 31 2004, 04:01 AM)

is that on the outside case or on the disc? outside case im assuming, it should work, i think the patched one is 1448531 on the outside