xboxscene.org forums

Author Topic: A19 Wire Gone  (Read 69 times)

horth

  • Archived User
  • Newbie
  • *
  • Posts: 2
A19 Wire Gone
« on: November 06, 2004, 11:00:00 PM »
Also, I was wondering if anyone had a good way to fix this problem.  Like I said, solder will not stick to the points, and the original circuit is completely gone.  Any advice would be greatly appreciated.
Logged

gamefreakgcb

  • Archived User
  • Full Member
  • *
  • Posts: 153
A19 Wire Gone
« Reply #1 on: November 07, 2004, 05:09:00 AM »
Well since it boots up normally you can flash it with a 1mb bios. I recommend X2 4983 bios. I had fragging with X2 4981 on a 1.1 mobo with a dual tsop.
Logged

horth

  • Archived User
  • Newbie
  • *
  • Posts: 2
A19 Wire Gone
« Reply #2 on: November 07, 2004, 07:34:00 AM »
I thought that this would cut the bios in half like if I was using a switch.  Only now since I have no switch I thought that the bios would always be at 512.  After installing a switch the bios boots normal, does it not.  And that bios is 512.
Logged