xboxscene.org forums

Pages: 1 2 [3] 4 5

Author Topic: Some Optional Point For 1.0-1.1 / 1.2-1.5  (Read 802 times)

sharon

  • Archived User
  • Jr. Member
  • *
  • Posts: 61
Some Optional Point For 1.0-1.1 / 1.2-1.5
« Reply #30 on: December 08, 2004, 01:28:00 PM »
This should be pinned for anyone who use nail-clippers to clean solders.

I wanted to clip off the solder on my original point and stripped the whole area...I was looking for an alt point and here is the answer. Someone helped me out with your post.

Thank you all.
Logged

slipperysnowman

  • Archived User
  • Newbie
  • *
  • Posts: 17
Some Optional Point For 1.0-1.1 / 1.2-1.5
« Reply #31 on: December 12, 2004, 01:38:00 PM »
bump
Logged

nugznmugz

  • Archived User
  • Newbie
  • *
  • Posts: 26
Some Optional Point For 1.0-1.1 / 1.2-1.5
« Reply #32 on: December 13, 2004, 10:04:00 PM »
QUOTE (mrpowerbook345 @ Oct 19 2004, 09:07 PM)
YES! biggrin.gif  i was able to flash it!!
one weird thing that i feal like mentioning.. evox couldnt flash the bios so i had to use eurasia. the chip is the one that everyone posts about that they cant flash, i can post the name of it later if you want it

evox won't seem to flash this chip either.  its a hynix chip.  what do you suggest?
Logged

leaveye

  • Archived User
  • Newbie
  • *
  • Posts: 17
Some Optional Point For 1.0-1.1 / 1.2-1.5
« Reply #33 on: December 16, 2004, 02:44:00 PM »
Sorry for the ignorance, but what is the VCC point for the sharp tsop? I did a successful flash of a 1.4, this made it a freak'n piece of cake.  Little puzzled on the 1.1 with sharp, there are just a few too many differing opinions as to which points actually need bridging.  If I could just get that first clarification, on where the vcc is and what I'm supposed to do with it, I could knock this one out no problem.
Logged

lordvader129

  • Archived User
  • Hero Member
  • *
  • Posts: 5860
Some Optional Point For 1.0-1.1 / 1.2-1.5
« Reply #34 on: December 16, 2004, 03:10:00 PM »
Logged

slipperysnowman

  • Archived User
  • Newbie
  • *
  • Posts: 17
Some Optional Point For 1.0-1.1 / 1.2-1.5
« Reply #35 on: December 16, 2004, 11:07:00 PM »
Thanks for the post, I had been getting a few msg's here or there about people asking how to flash sharps. Glad I have somewhere to point them now.

As always, you come through vader smile.gif
Logged

leaveye

  • Archived User
  • Newbie
  • *
  • Posts: 17
Some Optional Point For 1.0-1.1 / 1.2-1.5
« Reply #36 on: December 27, 2004, 01:48:00 PM »
Just did my fourth box.  This is invaluable!
Logged

maLniveK

  • Archived User
  • Newbie
  • *
  • Posts: 5
Some Optional Point For 1.0-1.1 / 1.2-1.5
« Reply #37 on: February 18, 2005, 10:02:00 AM »
This is so great!!!

I messed up the points posted on the original tut and also lifted 1 bottom trace. let see if i use alt points in this guide will it work?

thanks
Logged

Leafz

  • Archived User
  • Full Member
  • *
  • Posts: 151
Some Optional Point For 1.0-1.1 / 1.2-1.5
« Reply #38 on: February 18, 2005, 07:11:00 PM »
QUOTE(maLniveK @ Feb 18 2005, 11:08 AM)
This is so great!!!
Logged

nightmare_03

  • Archived User
  • Newbie
  • *
  • Posts: 7
Some Optional Point For 1.0-1.1 / 1.2-1.5
« Reply #39 on: March 12, 2005, 03:49:00 PM »
Do i have to solder the points on the top and bottom in the diagrams? or just one side?

Thanks,
Nightmare
Logged

apechimp

  • Archived User
  • Newbie
  • *
  • Posts: 11
Some Optional Point For 1.0-1.1 / 1.2-1.5
« Reply #40 on: March 13, 2005, 09:34:00 PM »
it doesn't matter what side of the board, just as long as you bridge red to blue and sky blue to yellow. just make sure to only bridge them once.

btw this is the best thread ever and most def deserves a pin
Logged

agent037

  • Archived User
  • Newbie
  • *
  • Posts: 1
Some Optional Point For 1.0-1.1 / 1.2-1.5
« Reply #41 on: April 14, 2005, 09:41:00 PM »
QUOTE(Leafz @ Feb 18 2005, 08:17 PM)
Does your xbox boot normal? If it does try the Alt points and retry to flash.
Logged

Lord Magnus

  • Archived User
  • Hero Member
  • *
  • Posts: 515
Some Optional Point For 1.0-1.1 / 1.2-1.5
« Reply #42 on: July 13, 2005, 03:34:00 PM »
I know I'm reviving an old post, but damn... I thought I'll come back and thank davicoro for helping me find this alternative points.

I fixed, retraced and soldered my friends Matix modchip on his old 1.0 MoBo... but the d0 was so damn small I was having a hard time trying to solder it, even with the flux.

It worked like a charm on the alternate points.

My kudos to you davicoro!
Logged

lordvader129

  • Archived User
  • Hero Member
  • *
  • Posts: 5860
Some Optional Point For 1.0-1.1 / 1.2-1.5
« Reply #43 on: August 15, 2005, 07:26:00 PM »
you can join any point highlighted in yelllow to any point highlighted in sky blue to write enable the TSOP
Logged

Helios

  • Archived User
  • Sr. Member
  • *
  • Posts: 335
Some Optional Point For 1.0-1.1 / 1.2-1.5
« Reply #44 on: October 04, 2005, 11:45:00 PM »
This tutorial will be great for people who mess up TSOP solder jobs. I saved it all incase any of my friends start doing TSOP jobs. They are too eager and I can see them messing up at least once. Anyway nice work  beerchug.gif
Logged
Pages: 1 2 [3] 4 5
« previous next »