Topic: Is There A Tsop Flasing Video Guide? (Read 147 times)

afandiewinter · « **on:** August 09, 2004, 09:53:00 PM »

if u have MA, use THIS

dantheman · « **Reply #1 on:** August 10, 2004, 12:24:00 AM »

the problem is i have no idea how to soldier and wat exactly is it i have never soldiered i want a guide for complete noobs who have never even opened an xbox

0123456 · « **Reply #2 on:** August 10, 2004, 03:19:00 AM »

In that case - forget about TSOPing, the solder points are quite small and you have to know what you are doing otherwise you will kill your XBox.

Get an old PCB and practice your soldering first..

warbeast · « **Reply #3 on:** August 10, 2004, 04:50:00 AM »

nah just get a conductive pen and if the tip of the pen is to big squirt some ink on a match or a pencil and use that so you dont squrit ink all over the m/b
top
user posted image

bottom

just join the r7d3 jumpers if you have a winbound chip take a look at the tutorials

dantheman · « **Reply #4 on:** August 10, 2004, 03:41:00 PM »

i have no idea how to do that so i guess there is no video guide is there a way to back up my xbox hardrive to another xbox hardrive i will soon upgrade to i dont have any memory cards so please tell me what to do

dantheman · « **Reply #5 on:** August 18, 2004, 01:40:00 AM »

bucko · « **Reply #6 on:** August 18, 2004, 07:46:00 AM »

We already told you, get a mod chip if you have never solderd before they are a lot easier.

hawgman · « **Reply #7 on:** August 18, 2004, 08:56:00 AM »

those two jumper spots are easy. just get a 15W soldering iron (and solder)from
radio shack and follow the pictures above for the points.

just put a tiny blob of solder on the tip of the iron and aim for a spot in between the points and you will solder then together it only takes like 1 sec.

if you dont have a memory card you can still tsop flash using the

hdd swap method and xlinux cd..

use this guide.

http://forums.xbox-s...howtopic=249561

piece of cake

dsrice · « **Reply #8 on:** August 19, 2004, 04:17:00 PM »

I was woundering if anyone has did this, or if it will work???

1. buy one of these
user posted image

2. install a 2.3b, and connect the above mentioned two jumper points
3. flash the Tsop with what ever bios using the slayers (it says flash Tsop in on of the options)
4. remove the xapter/chip
5. Play with my newly modded xbox in eternal bliss?

Does this work? Or do I need more, I am a noob when talking .Tsop, done many executer installs though.

Sorry if this has already been posted, but I searched and saw nothing.

acemilo · « **Reply #9 on:** August 19, 2004, 11:12:00 PM »

Nope, wont work. If you want to flash the tsop you must boot off it.

zipo1200 · « **Reply #10 on:** August 20, 2004, 11:08:00 AM »

a lot of people stress how hard it is to flash the tsop. if u have versions 1.2/1.5 its easy. just follow the tutorials and make sure u have the right rom. expecially make sure it isnt corrupt

Author Topic: Is There A Tsop Flasing Video Guide? (Read 147 times)