Topic: How To Re-flash A Tsop W/ Raincoat 0.7? (Read 195 times)

$langer · « **on:** July 28, 2004, 07:26:00 PM »

Like the title says. I have a v1.0 xbox that came pre-flashed with the 4977 Bios. I want to Re-Flash the TSOP with a custom 4981 bios that removes the flubber animation because it stutters when checking for my dead dvd drive...

So my question is (since I didn't even do the original flash) how to you reflash the TSOP with Raincoat? Can I run it as an app or do I have to use a 007 game exploit like the tutorials? I'm not quite sure what to do since all the tutorials are for the original flash. Is there a tut for RE-flashing the TSOP?

Thanks!

d-2-d · « **Reply #1 on:** July 28, 2004, 07:38:00 PM »

If the bios is alrady flashed with a hacked one then you can run it as an app. Also you should use the xbtool to turn off the detect DVD drive...

$langer · « **Reply #2 on:** July 28, 2004, 10:08:00 PM »

thx for the tip, d-2-d. so i would just run rain coat and use the commands from the tuts?

also, this xbtool interests me, is it an xbox app or a bios editor?

thanks!

$langer · « **Reply #3 on:** July 28, 2004, 10:39:00 PM »

i did some searching and found that xbtool is the same as xboxtool... right now I have a bios that has the dvd check off to allow me to boot my xbox w/ no dvd drive. the problem is that the bios still seems to check for it because the during the fluber animation the picture and sound locks up for a second, right at the time the dvd drive usually trys to check for a dvd. i find by disabling the fluber animation you don't notice the lockup (if there even is one) because the picture is still and there is no sound...

$langer · « **Reply #4 on:** July 29, 2004, 09:00:00 AM »

So to re-flash with raincoat 0.7, do I run it as an app and then telnet in from my PC, using the commands from the tutorials?

Thanks!

$langer · « **Reply #5 on:** July 29, 2004, 09:46:00 AM »

Thanks!

pontfirebird73 · « **Reply #6 on:** July 29, 2004, 10:36:00 AM »

why don't you just flash it with evox?

$langer · « **Reply #7 on:** July 29, 2004, 10:52:00 AM »

I don't trust evox (or like it) I want to use Raincoat because it is considered the best way to flash...

So as I asked in my previous post, how do I "run it as an app" There is no .xbe file... Someone has got to know how to do this! lordvader129?

$langer · « **Reply #8 on:** July 29, 2004, 07:03:00 PM »

belgarath · « **Reply #9 on:** July 29, 2004, 07:17:00 PM »

you have the source not the build find the build of it
it is in sombodys sig around this thred not to sure who

belgarath · « **Reply #10 on:** July 29, 2004, 07:23:00 PM »

ok for raincoat
check this thread
other thread
look for
spradley418
sig he has a link

$langer · « **Reply #11 on:** July 29, 2004, 07:28:00 PM »

awesome, thanks guys!

$langer · « **Reply #12 on:** July 29, 2004, 08:10:00 PM »

Author Topic: How To Re-flash A Tsop W/ Raincoat 0.7? (Read 195 times)