xboxscene.org forums

Author Topic: Flashing Bios  (Read 65 times)

d-2-d

  • Archived User
  • Full Member
  • *
  • Posts: 136
Flashing Bios
« on: July 28, 2004, 07:41:00 PM »

IF i got this correct you are tsop'ing the xbox and you are using raincoat. Once you load the exploited hacked save you can TELNET in to the xbox and follw this...

We want to telnet into "192.168.0.64" which is the IP address that the savegame embedded linux will pick, and log in as "root" with the password defaulting to "xbox".

If you got in now type "cd ../../media/E/UDATA/4541000d/000000000000/raincoat" yea its long but u can copy and paste.
Once in there, two commands. One is " ./raincoat -r backup.bin -v " which will back up your existing MS stock bios to a file called backup.bin If you get a READ ONLY anywhere when you do this, or otherwise it fails... it's time to go check your solder or go ask around concerning the problem in particular.

If that command works and your all backed up, then type " ./raincoat -p bios.bin " which will then flash your bios with the new one! You are now done flashing the xbox.....
Logged