Topic: Probs With A St Tsop Flash (Read 54 times)

xaser · « **on:** March 15, 2004, 04:32:00 PM »

Hey, I TSOPed 2 xbox before both 1.3's with WINBOND chips. I got a new 1.4/1.5 with a ST chip. It reads: M29F002BT70N1. I soldred the 2 top points.. the bottom one is identical to the top one.. so no reason to solder it. I am using 007 with raincoat. This is my config file:

Flash = 0x01d5,"AMD - Am29F080B",0x100000
Flash = 0x04d5,"FUJITSU - MBM29F080A",0x100000
Flash = 0xadd5,"Hynix - HY29F080",0x100000
Flash = 0x20f1,"ST - M29F080A",0x100000
Flash = 0xbf61,"SST SST49LF020",0x40000
Flash = 0x89a6,"Sharp LHF08CH1",0x100000
Flash = 0xda8c,"Winbond W49F020",0x40000
Flash = 0x20B0,"ST 29F002",0x40000
Flash = 0x20B0,"UNKOWN CHIP",0x40000
Flash = 0x20B0,"UNKOWN DEVICE",0x40000

The last 3 enteries were added by me after I kept getting UNKNOW DEVICE.

Any ideas to why is this happening?

Thank you

Arakon · « **Reply #1 on:** March 15, 2004, 07:45:00 PM »

your entry is most likely wrong.. I think 20B0 is for the old 8 mbit chip, not this one.

xaser · « **Reply #2 on:** March 15, 2004, 08:00:00 PM »

So.. whats the right entery?

terrorvis · « **Reply #3 on:** March 15, 2004, 10:35:00 PM »

Update your raincoat to 0.7 it has the following list;

1nick9 · « **Reply #4 on:** March 15, 2004, 11:28:00 PM »

wow nice flash config terrorvis
and i through my was big

cheers

xaser · « **Reply #5 on:** March 16, 2004, 04:48:00 AM »

waw dude.. thanks alot!! worked!! some1 needs to sticky that config!

terrorvis · « **Reply #6 on:** March 16, 2004, 04:52:00 AM »

Its the standard raincoat 0.7 config file. All credit goes to exobex

Glad to hear it all went well though.

This post has been edited by terrorvis: Mar 16 2004, 12:57 PM

Exobex · « **Reply #7 on:** March 16, 2004, 06:27:00 AM »

Author Topic: Probs With A St Tsop Flash (Read 54 times)