Print

[SLuSHIE]

hey, im flashing my friends tsop today he has a V1.3 with a ST tsop

im telnetted into xbox, and this is what it says

# ./raincoat -p bios.bin
raincoat Flasher  0.5  Apr 14 2003  [email protected]  http://xbox-linux.sf.net
Reading /etc/raincoat.conf... (unable to open /etc/raincoat.conf, using default
list)

UNKNOWN DEVICE manf=0x20, dev=0xB0
Try adding the device ID to /etc/raincoat.conf
#


ive added UNKNOWN DEVICE manf=0x20, dev=0xB0 to the end of my config file and its still not working......

Flash = 0x01d5,"AMD - Am29F080B",0x100000
Flash = 0x04d5,"FUJITSU - MBM29F080A",0x100000
Flash = 0xadd5,"Hynix - HY29F080",0x100000
Flash = 0x20f1,"ST - M29F080A",0x100000
Flash = 0xbf61,"SST SST49LF020",0x40000
Flash = 0x89a6,"Sharp LHF08CH1",0x100000
Flash = 0xda8c,"Winbond W49F020",0x40000
Flash = 0x20B0,"ST M29F002BT",0x40000
UNKNOWN DEVICE manf=0x20, dev=0xB0

thats what my config file looks like.....can anyone tell me if theres something wrong with it? is there an error in the config? ive got an xecuter 4981 256k bios named bios.bin in the raincoat dir with the config file....can anyone tell me whats wrong please? using raincoat 0.5......

thanks for the replies, very much appreciated.

by the way, i soldered the points to bridge the 2 points on the top of the motherboard....perfect connections...


thanks....

This post has been edited by SLuSHIE: Mar 10 2004, 03:47 AM

[SLuSHIE]

w0000t got it working, i just used 0.7 raincoat,

and 1 more thing......i have a switch and with it on or off it boots xecuter 2 bios then ms dash...how do i go about so when its on it loads evox and when its off it loads ms dash? that would rock...

[terrorvis]

QUOTE

and 1 more thing......i have a switch and with it on or off it boots xecuter 2 bios then ms dash...how do i go about so when its on it loads evox and when its off it loads ms dash? that would rock...

Can't be done on a 1.3 without a mod chip.  You only have space for one Bios on your chip.

[SLuSHIE]

ah, thanks a bunch