xboxscene.org forums

Author Topic: Flashing With Slayers  (Read 91 times)

gibbo

  • Archived User
  • Newbie
  • *
  • Posts: 4
Flashing With Slayers
« on: March 02, 2004, 01:31:00 AM »

:uhh: hello can any ony help, soldered 2 points on top, used the 007 expolit then put bert and ernis in fronts folder , then put Signed Pheonix Bios Loader on to c drive which lets me read slayer disks then i flash with m7ejtfix bios. done 2 in the past worked good v1.3 and v1.0 now i tryed on newer versions having problems flashing it starts to flash and it just stay on the erasisg screen (manufactuers id da device id 8c flash type winbound w29fo20 erasing) and dose not go passed that, is it to do with winboud chip or soldering any help would gretfull :uhh:  
Logged

ICEMANMODS

  • Archived User
  • Jr. Member
  • *
  • Posts: 79
Flashing With Slayers
« Reply #1 on: March 02, 2004, 01:41:00 AM »

Slayers disk is based on Evox, you cannot flash winbond chips with Evox its impossible. You will need to obtain a copy of 007 auf or Mechassault, download the Mecheurasia from xbins, throw in a 256k IMAGE of the bios of your choice not 1meg and it should work.
Logged

ICEMANMODS

  • Archived User
  • Jr. Member
  • *
  • Posts: 79
Flashing With Slayers
« Reply #2 on: March 02, 2004, 01:42:00 AM »

On second thought I think there is a 256K image in he mecheurasia package, not sure but doulble check.
Logged

lordvader129

  • Archived User
  • Hero Member
  • *
  • Posts: 5860
Flashing With Slayers
« Reply #3 on: March 02, 2004, 09:32:00 AM »

i know eurasia wont flash if it has the wrong size bios, so it cant hurt to try

and you wont need to run a game oranything, with your exploited dashboard youll be able to just launch the xbe with evox, you shoudl even be able to add eurasia to a SlaYers ISO and use that
Logged

venturahighway

  • Archived User
  • Sr. Member
  • *
  • Posts: 278
Flashing With Slayers
« Reply #4 on: March 02, 2004, 11:55:00 AM »

QUOTE (lordvader129 @ Mar 2 2004, 07:25 PM)
i know eurasia wont flash if it has the wrong size bios, so it cant hurt to try

and you wont need to run a game oranything, with your exploited dashboard youll be able to just launch the xbe with evox, you shoudl even be able to add eurasia to a SlaYers ISO and use that

the problem is that that eurasia has the 007 gamesave dir hard coded.

the euasia flash disc 1.2 is a better way to flash with a pre-TSOPed box
you could add it to slayers and insert a bios disc when propted.
Logged

lordvader129

  • Archived User
  • Hero Member
  • *
  • Posts: 5860
Flashing With Slayers
« Reply #5 on: March 02, 2004, 12:05:00 PM »

you can put it in the 007 folder, your just running the xbe from evox rather than the 007 gamesave
Logged