xboxscene.org forums

Pages: 1 [2]

Author Topic: Help With Hyjink Chip On 1.3 Box  (Read 116 times)

lordvader129

  • Archived User
  • Hero Member
  • *
  • Posts: 5860
Help With Hyjink Chip On 1.3 Box
« Reply #15 on: February 25, 2004, 12:58:00 PM »
QUOTE
Item "Flash Bios",ID_Flash_Bios

to evox.ini in the menu section

you might need to add this under flash types
QUOTE
Flash = 0xadb0,"Hynix HY29F002",0x40000


Logged

ICEMANMODS

  • Archived User
  • Jr. Member
  • *
  • Posts: 79
Help With Hyjink Chip On 1.3 Box
« Reply #16 on: February 25, 2004, 12:59:00 PM »
I cannot get this to work its driving me INSANE
Logged

ICEMANMODS

  • Archived User
  • Jr. Member
  • *
  • Posts: 79
Help With Hyjink Chip On 1.3 Box
« Reply #17 on: February 25, 2004, 12:59:00 PM »
QUOTE (lordvader129 @ Feb 25 2004, 10:58 PM)
wait a sec....if you have evox, why not just flash from evox?

put a folder called Bios in the same folder as the default.xbe (in the MA gamesave directory) and put the bios you want to use in there, the add the line
QUOTE
Item "Flash Bios",ID_Flash_Bios

to evox.ini in the menu section

you might need to add this under flash types
QUOTE
Flash = 0xadb0,"Hynix HY29F002",0x40000

WIll try that..
Logged

ICEMANMODS

  • Archived User
  • Jr. Member
  • *
  • Posts: 79
Help With Hyjink Chip On 1.3 Box
« Reply #18 on: February 25, 2004, 01:02:00 PM »
I was under the impression you couldnt flash from evox now im trying..
Logged

ICEMANMODS

  • Archived User
  • Jr. Member
  • *
  • Posts: 79
Help With Hyjink Chip On 1.3 Box
« Reply #19 on: February 25, 2004, 02:17:00 PM »
QUOTE (marcutah @ Feb 25 2004, 10:59 PM)
QUOTE (lordvader129 @ Feb 25 2004, 10:58 PM)
wait a sec....if you have evox, why not just flash from evox?

put a folder called Bios in the same folder as the default.xbe (in the MA gamesave directory) and put the bios you want to use in there, the add the line
QUOTE
Item "Flash Bios",ID_Flash_Bios

to evox.ini in the menu section

you might need to add this under flash types
QUOTE
Flash = 0xadb0,"Hynix HY29F002",0x40000

WIll try that..

It worked..
Logged

Exobex

  • Archived User
  • Hero Member
  • *
  • Posts: 1093
Help With Hyjink Chip On 1.3 Box
« Reply #20 on: February 26, 2004, 09:07:00 AM »
Can the Eurasia flasher be updated, or is raincoat embedded in the initial filesystem that it loads up?  If this is the case, you may have to wait until they update their flash kits with raincoat 0.7.
Logged

lordvader129

  • Archived User
  • Hero Member
  • *
  • Posts: 5860
Help With Hyjink Chip On 1.3 Box
« Reply #21 on: February 26, 2004, 10:59:00 AM »
didnt occur to me it could be imbedded in the file system, but it seems that would be the case, its why i dont use any auto-flasher stuff
Logged

Exobex

  • Archived User
  • Hero Member
  • *
  • Posts: 1093
Help With Hyjink Chip On 1.3 Box
« Reply #22 on: February 27, 2004, 02:24:00 AM »
QUOTE (lordvader129 @ Feb 26 2004, 07:59 PM)
didnt occur to me it could be imbedded in the file system, but it seems that would be the case, its why i dont use any auto-flasher stuff

I checked last night, and this indeed appears to be the case.  The filesystem is in a single file zipped into initrd.gz.  No raincoat in sight.
Logged

blueinfinity

  • Archived User
  • Hero Member
  • *
  • Posts: 725
Help With Hyjink Chip On 1.3 Box
« Reply #23 on: February 27, 2004, 02:31:00 AM »
wink.gif

Logged

Exobex

  • Archived User
  • Hero Member
  • *
  • Posts: 1093
Help With Hyjink Chip On 1.3 Box
« Reply #24 on: February 27, 2004, 02:53:00 AM »
QUOTE (blueinfinity @ Feb 27 2004, 11:31 AM)
um.. did we bother to check our points?

just a q?  wink.gif

No need.  His manufacturer ID is coming up as AD, with a device type B0.  That means the flasher can see the chip, but hasn't got an entry in its configuration file that matches it.
Logged

ICEMANMODS

  • Archived User
  • Jr. Member
  • *
  • Posts: 79
Help With Hyjink Chip On 1.3 Box
« Reply #25 on: February 28, 2004, 09:59:00 PM »
QUOTE (blueinfinity @ Feb 27 2004, 05:31 AM)
um.. did we bother to check our points?

just a q?  wink.gif

I knew it wasnt the points, I am a very solid .. solderer.. mouthful there.

It was the fact that I didnt have the device in the list with raincoat.
The problem I was facing as you cans ee above it that my Raincoat on my card was extracing it from a bundle a gz, the new 0.7 wasnt setup that way to just copy and paste the files into it, I ended up creating my own gz with the new 0.7 afterwards.

But I ended up just adding the device info to my evox.ini and flashing it there, worked just fine. Just a new bios that I hadnt done, up to date ive done.. a gizzilon winbond and this was the first of this type, thanks for all your help tho you guys
Logged

ICEMANMODS

  • Archived User
  • Jr. Member
  • *
  • Posts: 79
Help With Hyjink Chip On 1.3 Box
« Reply #26 on: February 28, 2004, 10:07:00 PM »
Exobex Posted: Feb 27 2004, 05:53 AM  


X-S Expert


Group: Members
Posts: 666


ack....
Logged
Pages: 1 [2]
« previous next »