Topic: Flash Any Version Xbox With Any Lpc Modchip (Read 448 times)

FlashKick · « **Reply #30 on:** April 09, 2004, 05:58:00 PM »

i used bigfont25 or something and it works good all the time

vokal4 · « **Reply #31 on:** April 09, 2004, 06:39:00 PM »

k thnx

XDelusion · « **Reply #32 on:** April 17, 2004, 10:54:00 PM »

Quote:

"now boot your xbox with the chip enabled to load evox (or any dashboard that allows FTP access) backup C:\Fonts to your PC and FTP the eploit .xtf files to that folder, overwriting the existing files:

Ok, I back up the Fonts folder to my PC, then I copy my fonts over to the Fonts foolder on the XBOX, but what do I name the fonts, and what font package should I use on a 1.5 XBOX?

"FTP the evox default.xbe and evox.ini to wherever your exploit loads it from (usually C:\default.xbe or C:\Fonts\default.xbe)"

How do I know where my Font exploit wants the file default.xbe file?

XDelusion · « **Reply #33 on:** April 20, 2004, 10:14:00 AM »

lordvader129 · « **Reply #34 on:** April 20, 2004, 08:39:00 PM »

that tutorial has already been written, mine is for epopel who cant find a working copy of any exploitable games in their area

@Tadango

hotswapping wont work (i assume you mean boot with modchip then remove it or disable it) because once the xbox boots the LPC it will always look to teh LPC for the bios, so youll only be able to flash your modchip, not the TSOP, if you have one of those shitty kernels youll need to use a gamesave exploit (or a 29-wire modchip)

XDelusion · « **Reply #35 on:** April 20, 2004, 09:20:00 PM »

I did not understand your tutorial in the least bit. No offence.
It did not tell me what FONT pack to use, because I read a lot of stuff in the forums about certain FONT packs not working with certain model XBOX's, also in your tutorial you stated that I would need to back up my fonts directory on the PC, then copy my hacked ones over and let them overwrite the old ones?

Well I downloaded all the Font packs I could find off XBINS and none of them shared a commen name with the fonts already in the directory.

Also if you are not using a copy of 007, then what is the point of having the 007 game save in place at all? Or are you just suggesting that so that the person has easy acess to the Raincoat Default.xbe?

Finanally, I don't understand how you could possibly boot into Evox after merely copying those files over unless that hacked Font trick is supposed to do it for you. I dunno, I'm not familiar at all with the Font exploit.
Perhaps if you could elaberate a bit more on the subject I may have a means to correct my apparently corrupted TSOP on my 3rd XBOX.

blackout_19 · « **Reply #36 on:** May 15, 2004, 10:58:00 AM »

Just wanted to say that I flashed my first tsop with this tutorial today. I've done dozens of modchip installs, and had a spare xbox lying around. Thought i'd give it a go.

I used the bert and ernie reloaded and evox 3921. So anyone who said that these items were the cause of their problems would appear to have other issues.

Thanks again to everyone involved in getting this tutorial sorted.

boowhup · « **Reply #37 on:** May 20, 2004, 02:55:00 PM »

A few things you might need to do (I have just follwed this exact method, works a treat)

REname the evoxdash to default.xbe in youre C:\ directory. from what I understand the exploits load default.xbe in you're C:\ root dir.

I used bigfonts25, put bert and ernie in C:\fonts, then renamed the original font files to .xft (left them in C:\fonts) I didn't bother backing up etc, but I have enough box's and chip's lying around to sort myself out (And I had already unlocked and relocked the HD with config magic so I new if worst came to worse I could figure something out).

From what I could tell it doesn't matter where you put raincoat , I tried it in a few diff places, so Long as you can get to it from evox (put the right path in the ini) From what I gather it needed to be in the udata/xxx/0000/xx whatever directory so it could be accessed by a memory card or some such thing, but since this method doesnt necessarily use the memcard technique at all then it;s ok.

From youre description it sounds like the hack is loading (almost loading msdahboard) , but then service warning , I'm fairly sure it's because of the evoxdash.xbe not being called default.xbe , but I could be mistaken - Make a copy of it and rename the copy default.xbe, won't hurt to have a signed evoxdash.xbe as well I guess)

*** THIS IS MY OPINION ONLY, IT MIGHT PAY TO WAIT FOR OTHERS TO COMMENT BEFORE YOU DAMAGE YOU'RE XBOX FURTHER *** If anyone sees flaw in what I've said please feel free to comment.

CATT · « **Reply #38 on:** July 22, 2004, 09:59:00 AM »

Ok Faramisimo.....just flashed 2 ..a hynix with 1mb and a winbond with 256

USED BERT AND ERNIE RELOADED

You place the bios.bin in the raincoat folder

i also put an evox.ini and evoxdash.xbe in the font folder for good measure

on the winbond fitted xbox i got an error 21 on reeboot with the chip disabled
so what i did was replace the 2 folders for xbox live with slayers from his disc
cant remember what folder they r located but if u browse the disc you will find them

after doing this i rebooted with the chip turned off and it went to the raicoat option
..did the rest of the tut and it worked

Folders that need replaced to fix error 21 are xodash and xboxdashdata

a tip when using telnet "make sure u type it exactly as seen"
i didnt leave a space between cd and the ../
started to panic lol

blindguyinanorgy · « **Reply #39 on:** August 03, 2004, 05:03:00 PM »

bumpity du da

lordvader129 · « **Reply #40 on:** August 03, 2004, 05:14:00 PM »

lordvader129 · « **Reply #41 on:** August 05, 2004, 07:24:00 PM »

parkerbender · « **Reply #42 on:** October 07, 2004, 01:46:00 PM »

i have the same problem on a 1.2, did everything, even tried replacing the two folders that catt said to, do i need to do anything special with the files in c: otherwise? i am going to start from scratch again, but i dont know why this isn't working, also i renamed bert xbox and ernie xbox data dunno if that was the right way but is seems noone will say, please reply, thanks!
-parker

xokia · « **Reply #43 on:** October 07, 2004, 11:06:00 PM »

beenievtec · « **Reply #44 on:** October 29, 2004, 02:38:00 AM »

I tried everything ..and double checked everything but still dont know whats up. Using a xenium..did all the xbedump stuff...ftp's everything that needed to be(fonts and stuff)..got 4920 dashboard from slayers

... but i get an error code 13...i read this has something to do with the dashboard...can someone point me in the right direction at least...does this have to do with MS dashboard or evox dash that the font is supposed to load. should i recheck my soldering? i'm lost and have been at this for DAYS!!! any help would be greatly appreciated

Author Topic: Flash Any Version Xbox With Any Lpc Modchip (Read 448 times)