Topic: Flash Any Version Xbox With Any Lpc Modchip (Read 448 times)

lordvader129 · « **Reply #45 on:** October 29, 2004, 10:50:00 AM »

whats your kernel version? likely its 5713, which will not load 4920 dashbaord, you need to get a newer dashbaord and try UDE

laxb0y1o · « **Reply #46 on:** November 25, 2004, 04:28:00 AM »

can i still use this tut if my Tsop has a bad flash?

A5thZeke · « **Reply #47 on:** January 04, 2005, 09:22:00 AM »

QUOTE(lordvader129 @ Apr 21 2004, 04:10 AM)

(i assume you mean boot with modchip then remove it or disable it) because once the xbox boots the LPC it will always look to teh LPC for the bios, so youll only be able to flash your modchip, not the TSOP, if you have one of those shitty kernels youll need to use a gamesave exploit (or a 29-wire modchip)

b01 · « **Reply #48 on:** January 04, 2005, 10:20:00 AM »

QUOTE

Why is it that when you disable an lpc modchip the xbox still boots to evox? I always thought that it would simply disregard the modchp and boot from the normal xbox bios. This means that it would load the normal xbox dashboard. Why is this not the case?

Are you saying that after you disable the modchip, then turn off the xbox and reboot, it still loads EvolutionX?

-OR-

Do you disable the modchip (while xbox is still on), then do a restart from the EvoxlutionX menu?

Please clarify what steps you take?

A5thZeke · « **Reply #49 on:** January 04, 2005, 10:22:00 AM »

does it make a difference, i think both ways boot to evox though

lordvader129 · « **Reply #50 on:** January 04, 2005, 01:18:00 PM »

QUOTE(A5thZeke @ Jan 4 2005, 11:53 AM)

does it make a difference, i think both ways boot to evox though

A5thZeke · « **Reply #51 on:** January 05, 2005, 05:05:00 AM »

ok, ill try that, thanks

"WITHOUT UNPLUGGING THE XBOX OR REMOVING THE MODCHIP reboot the xbox with the chip disabled, it should load into evox"

How does that way work? Im guessing thats the b01 said with disabling modchip while xbox is one, then rebooting through evox

lordvader129 · « **Reply #52 on:** January 17, 2005, 11:20:00 AM »

for 0x09 double/triple/quadruple check your solder points (clean them off completely and solder again) also make sure you are using raincoat .7

for 0xFF make sure you are booting with the modchip removed/disabled and not removing it after booting

eXo · « **Reply #53 on:** February 02, 2005, 12:09:00 AM »

xboxhaxorz · « **Reply #54 on:** February 02, 2005, 12:16:00 AM »

umm, i have a nonworking board. but when i put a chip in it it will work with the mod functional, but switch the mod off and it shows no screen. so basically it works with the x2 bios when its on.

eXo · « **Reply #55 on:** February 08, 2005, 05:10:00 PM »

QUOTE(eXo @ Feb 8 2005, 09:32 PM)

sig hail lord vader, I have teh following question:

lordvader129 · « **Reply #56 on:** February 08, 2005, 07:05:00 PM »

QUOTE(eXo @ Feb 8 2005, 05:16 PM)

correction, I have a Xecuter2 pogo chip. Just wonder how do you get it to work like that ?

whackawookie · « **Reply #57 on:** February 09, 2005, 10:23:00 AM »

im about to get cracking on this but the first image isnt popping up with the 2 spots on the topside. any chance of reupping that?

whackawookie · « **Reply #58 on:** February 09, 2005, 02:27:00 PM »

well i joined only the bottom spots seeing as how there the only ones that are showing, but when i load raincoat i get a bunch of errors at the top screen. the box im doing has a shot ethernet port, could that have something to do with it. i cant try flashing from evox because no bios i put in the bios folder shows up. im burning slayers now and seeing if that does the trick.

derrict · « **Reply #59 on:** March 27, 2005, 04:55:00 PM »

I was able to flash the TSOP on one xbox successfully. Is it possible to use the same HD to flash another xbox. if so how. Help please

Author Topic: Flash Any Version Xbox With Any Lpc Modchip (Read 448 times)