Print

[UsMarine]

Well guys,

I had an xbox modded to where when the switch was OFF It loaded the original xbox bios and when the switch was ON it loaded the other bios.  Well here is the evox.ini on flashing so you can see what it is set at.

Item "Settings",@9
               Section "Flash BIOS..."
      {
         Item "Select Bios From List...",@1
         Section "Flash Matrix..."
         {
            Item "Flash Matrix X2 4974",@250
         }
         Section "Flash Tsop..."
         {
            Item "Flash Tsop X2 4974 A19 Disable",@251
         }


I selected first flsh matrix and it flashed the xbox with a new bios but not switch ON or OFF it loads the other bios so I guess I flashed over the Xbox Bios.

My question is "Is there a way to reflash the xbox so when the switch is on it loads the xbox bios? I can get ahold of an xbox bios"

Anyone care to tell me how?

[UsMarine]

37 views and no answer? Interesting  

[midiemulation]

Hi,

Your evox.ini has nothing to do with a split tsop except for the fact that you can flash it from evox. You would want the first 1/2 with an xecuter/cromwell etc and your 2/2 to be MS. The switch would be on a +5 and ground with the center on a19. Every time you flip your switch it should change your bios therefore stoping you from being able to boot from one bad flash or enabling online play with a mod.

This post has been edited by midiemulation: Feb 20 2004, 01:31 PM