xboxscene.org forums

Pages: 1 ... 3 4 [5] 6 7 ... 10

Author Topic: Tsop Flash ALL Versions.  (Read 1514 times)

blueinfinity

  • Archived User
  • Hero Member
  • *
  • Posts: 725
Tsop Flash ALL Versions.
« Reply #60 on: February 26, 2004, 10:15:00 AM »
smile.gif
Logged

blueinfinity

  • Archived User
  • Hero Member
  • *
  • Posts: 725
Tsop Flash ALL Versions.
« Reply #61 on: February 26, 2004, 09:17:00 PM »
blink.gif

But they dont like being bridged i guess
Logged

bourke

  • Archived User
  • Full Member
  • *
  • Posts: 195
Tsop Flash ALL Versions.
« Reply #62 on: February 27, 2004, 08:47:00 PM »
QUOTE
And the reason its set up like this is beause the winbond wont let u do that.. so how bout you read the full tutorial first?



You are SOOO wrong - Raincoat 0.7 DOES let you do it for the Winbond.

I.e. you should only need Raincaot for EVERYTHING!


It is ILLEGAL to own or use EvolutionX (Evox)...


It PERFECTLY LEGAL to use Raincoat and PPF :-)


... so by using EvoX YOU are ADMITTING YOU ARE BREAKING MANY LAWS!


WFT are you being so painfully disparaging yourself then!
Logged

bourke

  • Archived User
  • Full Member
  • *
  • Posts: 195
Tsop Flash ALL Versions.
« Reply #63 on: February 27, 2004, 08:50:00 PM »
How about I release my Raincoat 0.7 / PPF loader that automatically works for EVERY MODEL of Xbox?

That might make more people happy :-)
Logged

blueinfinity

  • Archived User
  • Hero Member
  • *
  • Posts: 725
Tsop Flash ALL Versions.
« Reply #64 on: February 29, 2004, 11:23:00 AM »
QUOTE (bourke @ Feb 28 2004, 12:47 AM)
QUOTE
And the reason its set up like this is beause the winbond wont let u do that.. so how bout you read the full tutorial first?



You are SOOO wrong - Raincoat 0.7 DOES let you do it for the Winbond.

I.e. you should only need Raincaot for EVERYTHING!


It is ILLEGAL to own or use EvolutionX (Evox)...


It PERFECTLY LEGAL to use Raincoat and PPF :-)


... so by using EvoX YOU are ADMITTING YOU ARE BREAKING MANY LAWS!


WFT are you being so painfully disparaging yourself then!

dude what the hell you were jsut tlaking about evox jack ass

stay out of my thread

if you know everything then go write your own program and stay out of mine


this is working for people.
so why come in here and make thigns difficult. when i decide i have found a better way i will write a new tutorial :|

sigh...  unsure.gif
Logged

blueinfinity

  • Archived User
  • Hero Member
  • *
  • Posts: 725
Tsop Flash ALL Versions.
« Reply #65 on: February 29, 2004, 11:27:00 AM »
QUOTE (mark876543 @ Feb 29 2004, 02:19 PM)
I am trying to flash my first TSOP, after doing several Xecuter mods.  I tested my Highway 007mech FlashPack (agent under fire save option) on my v1.5 modded box ( w chipp off) just to make sure it would load ok.  It works: when I load the save I get the evox menu and of couse if I try to flash the modded box I just get error about flash failed, which is expected because the unlock points aren't bridged.  But it seems to be loading just fine.

But on my friend's v1.0 box, I get ERROR 21, needs service, after loading up the gamesave.  I can't find any info on this by searching.

The chip on the v1.0 is an: ST  M29F080A.  How do you look up what size this is?  All I have found was in a readme file:
"AMD - Am29F040B"          = 524288  Bytes (0x80000)
"AMD - Am29F080B"          = 1048576 Bytes (0x100000)
"AMD - Am29LV800B"         = 1048576 Bytes (0x100000)
"FUJITSU - MBM29F040C"     = 524288  Bytes (0x80000)
"FUJITSU - MBM29F080A"     = 1048576 Bytes (0x100000)
"Hynix - HY29F080"         = 1048576 Bytes (0x100000)
"MACRONIX - MX29F022NTPC"  = 262144  Bytes (0x40000)
"Sharp LHF08CH1"           = 1048576 Bytes (0x100000)
"SST SST49LF020"           = 262144  Bytes (0x40000)
"ST M29f002BT"             = 262144  Bytes (0x40000)
"ST - M29F080A"            = 1048576 Bytes (0x100000)
"Winbond - W49F002U"       = 262144  Bytes (0x40000)
"Winbond W49F020"          = 262144  Bytes (0x40000)

This shows my ST brand chip as being 1mb.  So I plan to use a 1mb bios and evox.  But I can't get the savegame to load in the v1.0 box.

I soldered the 2 points together on the top and two on the bottom, per the v1.0 pics.  I didn't put the extra SHARP jumper because it's an ST not a SHARP. The v1.0 box boots just fine, it's just loading the savegame that causes the error 21.

ok wait two point sont he top? huh?

on a v1.0 its one on the top one on the bottom :|

as for the saved game maybe it is corrupted?

also MAKE sure u delete all other mech assault and 007 game saves first.. then upload the hacked versions

it jsut solves issues.. trust me smile.gif
Logged

mark876543

  • Archived User
  • Newbie
  • *
  • Posts: 32
Tsop Flash ALL Versions.
« Reply #66 on: February 29, 2004, 12:40:00 PM »
One bridge (adjacent two spots, connected with a short, fine wire and solder) on the top and one on bottom.  

For a v1.0 box with an ST m29f080a chip....  it says only the Sharp gets the extra jumper.  So if ST is another name for sharp that might be the misunderstanding. But I'm assuming ST is a brand and I'm not using the extra sharp jumper.

Well I did delete all saves on the card first before doing the copy.  And I don't think it's a bad save on the card because if I test this same process on the other box it goes right to the evox menu when I load the save, where I can select evox flashing or eurasia flashing.

What can cause error 21?  Anyone else ever see that?  It may be something to do with my soldering or with the version of box / chip... but I dunno what.  The soldering looks good, it isn't shorting anything.  And even if one place wasn't making contact, it seems like that wouldn't prevent the save from at least loading.  It just wouldn't flash, right?
Logged

xxxbigchuck

  • Archived User
  • Newbie
  • *
  • Posts: 6
Tsop Flash ALL Versions.
« Reply #67 on: February 29, 2004, 02:58:00 PM »
Every time I run mech assult and use the run unix save I get a  the service screen and the eject button flashes red and green. When I reboot the xbox it comes up norman. In the upper left xcreen it says 21.


Any Advice???
Logged

blueinfinity

  • Archived User
  • Hero Member
  • *
  • Posts: 725
Tsop Flash ALL Versions.
« Reply #68 on: February 29, 2004, 09:17:00 PM »
QUOTE (mark876543 @ Feb 29 2004, 04:40 PM)
One bridge (adjacent two spots, connected with a short, fine wire and solder) on the top and one on bottom.  

For a v1.0 box with an ST m29f080a chip....  it says only the Sharp gets the extra jumper.  So if ST is another name for sharp that might be the misunderstanding. But I'm assuming ST is a brand and I'm not using the extra sharp jumper.

Well I did delete all saves on the card first before doing the copy.  And I don't think it's a bad save on the card because if I test this same process on the other box it goes right to the evox menu when I load the save, where I can select evox flashing or eurasia flashing.

What can cause error 21?  Anyone else ever see that?  It may be something to do with my soldering or with the version of box / chip... but I dunno what.  The soldering looks good, it isn't shorting anything.  And even if one place wasn't making contact, it seems like that wouldn't prevent the save from at least loading.  It just wouldn't flash, right?

no not on the card
remove any 007 and mech saves from the xbox..


as for 21 im not sure WHY you would be seeing this :|

good question
Logged

blueinfinity

  • Archived User
  • Hero Member
  • *
  • Posts: 725
Tsop Flash ALL Versions.
« Reply #69 on: March 01, 2004, 09:19:00 PM »
QUOTE (mark876543 @ Mar 1 2004, 10:32 PM)
Thanks Blue. Success at last!  In my noobish ignorance I overlooked the fact that you have to copy the savegame back to the hard drive, I was trying to load it straignt off the memory card, causing the error 21.  Once I did it right, it worked like a charm!  First time to do this....   easy once you have done one. beerchug.gif   Nice flash kit.

Good to hear smile.gif
Logged

terrorvis

  • Archived User
  • Sr. Member
  • *
  • Posts: 283
Tsop Flash ALL Versions.
« Reply #70 on: March 02, 2004, 08:36:00 AM »
QUOTE
READ ME:
* if sharp here's what you do
* first solder a wire to each of these two extra points.
* boot up like normal.. goto the evo-x dash setu form my game save.
* twist the two wires togethor and go flash.
* power off and untwist
* should work
* if you plan to upgrade your tsop flash. i'd recomend installing a switch. leave off at all tiems unless you are flashing. then follow above steps. but using a switch instead of twisting.


Its the "* first solder a wire to each of these two extra points." line that is misleading.  It should really say "solder a wire to each of the top points"  the way it reads now,  I would think you are just going over the info on the extra jump lead that the sharps require.

Cheers, however you might not agree with my change, a do think this is an excelent tut.
Logged

lordvader129

  • Archived User
  • Hero Member
  • *
  • Posts: 5860
Tsop Flash ALL Versions.
« Reply #71 on: March 02, 2004, 09:48:00 AM »
or you can just be like me and link to A@ron's Sharp tutorial, its hsort, simple, and definitive

http://forums.xbox-s...howtopic=178511
Logged

bourke

  • Archived User
  • Full Member
  • *
  • Posts: 195
Tsop Flash ALL Versions.
« Reply #72 on: March 03, 2004, 02:52:00 AM »
QUOTE (blueinfinity @ Feb 29 2004, 09:23 PM)
QUOTE (bourke @ Feb 28 2004, 12:47 AM)
QUOTE
And the reason its set up like this is beause the winbond wont let u do that.. so how bout you read the full tutorial first?



You are SOOO wrong - Raincoat 0.7 DOES let you do it for the Winbond.

I.e. you should only need Raincaot for EVERYTHING!


It is ILLEGAL to own or use EvolutionX (Evox)...


It PERFECTLY LEGAL to use Raincoat and PPF :-)


... so by using EvoX YOU are ADMITTING YOU ARE BREAKING MANY LAWS!


WFT are you being so painfully disparaging yourself then!

dude what the hell you were jsut tlaking about evox jack ass

stay out of my thread

if you know everything then go write your own program and stay out of mine


this is working for people.
so why come in here and make thigns difficult. when i decide i have found a better way i will write a new tutorial :|

sigh...  unsure.gif


I originally made two points:

1) that EvoX has not required any padded 1024k bios in years.

2) that you do not need EvoX at all, and to instead use Raincoat for ALL chips.



You decried my thievery, yet admitted to no less yourself - absolute hypocrisy on a base level.


Evolution-X dashboard software uses illegally copied MS libraries, so do not preach to anyone else about unlawfull actions fella!
Logged

blueinfinity

  • Archived User
  • Hero Member
  • *
  • Posts: 725
Tsop Flash ALL Versions.
« Reply #73 on: March 03, 2004, 04:19:00 AM »
yes.

but eurasia and othres wont flash a padded 1mb to the earlyer versions

there for i would also need to tell newbies HOW to know when to change your bios's.

this way ev0x covers the first versionts and eurasia covers the others.

very well i COULD put a 256k in evo-x.. would save me space anyway lol
but evox wont cover winbond so eurasia is needed and eur will not cover the 1mb if its loaded with a 256k.. get my point?..
Logged

lordvader129

  • Archived User
  • Hero Member
  • *
  • Posts: 5860
Tsop Flash ALL Versions.
« Reply #74 on: March 03, 2004, 09:26:00 AM »
quick question bourke, what bios are you flashing with raincoat? i hope its not an illegal bios like x2 or evox


and i CERTAINLY hope you arent using this on an xbox, as that would violate the end user license agreement set forth by MS
Logged
Pages: 1 ... 3 4 [5] 6 7 ... 10
« previous next »