Topic: Impossible To Flash V1.4 Tsop Points (Read 110 times)

protowars · « **on:** January 02, 2004, 01:16:00 PM »

i flashed a v1.0 with a multi switch b4

i am now trying a v1.4 or 1.5 not sure

it was clone wars bundle

i soldered 2 on top

and the bottom point

cant get to work

i am using the same ma hak i used for the other board
i changed evox, so it flashes

but i get flash not writble error

stanneh · « **Reply #1 on:** January 02, 2004, 08:55:00 PM »

only the two points on the top to be soldered what version tsop? if its a winbond you have to flash it via raincoat and telnet.

protowars · « **Reply #2 on:** January 03, 2004, 07:11:00 AM »

how do i know the tsop version

stanneh · « **Reply #3 on:** January 03, 2004, 07:50:00 AM »

it will have a brand name on it write down all the info on the tsop chip and post it here.

azanboyz · « **Reply #4 on:** January 03, 2004, 09:20:00 PM »

Dude it might seem hard to get it to flash, but if you were read more on how to flash the xbox version 1.2-what ever now, it so easy, I was having problem too at first!!!!, I just finish flashing 2 xbox to day for a friends they both were ver.1.4, and they both have diference chips in there, one is WB, and the other one is ST chip, if you go here, http://www.gueux.net/modules/news/ and download that 007 tsop flash kit 1 0 alpha6 it so easy.

azanboyz · « **Reply #5 on:** January 03, 2004, 09:36:00 PM »

Sorry for posting a webpage for download stuft, I hope I don't get Band here!!!
Never happen again!!!!

Author Topic: Impossible To Flash V1.4 Tsop Points (Read 110 times)