Topic: V1.4 Or V1.5 Tsop Flash (Read 328 times)

xboxfrizzy · « **Reply #15 on:** December 26, 2003, 09:15:00 PM »

You need to unlock the factory harddrvie before you can swap the new one. Use slayer 2.5 to do this, or config magic final.

This post has been edited by xboxfrizzy: Dec 27 2003, 05:17 AM

theman32 · « **Reply #16 on:** December 27, 2003, 09:49:00 AM »

Tarobap · « **Reply #17 on:** December 27, 2003, 11:44:00 AM »

sorry see below (Slow servers!)

Tarobap · « **Reply #18 on:** December 27, 2003, 11:45:00 AM »

sorry see below (slow servers!)

Tarobap · « **Reply #19 on:** December 27, 2003, 11:46:00 AM »

sorry see below

Tarobap · « **Reply #20 on:** December 27, 2003, 11:53:00 AM »

Quick question . . . Here it says that there is an additional set of points on the bottom of the mobo to bridge . . . but the statement is for V1.2, 1.3, 1.4, 1.5 xboxes. What I am understanding from this thread is that for 1.4 and 1.5 xboxes, THAT BOTTOM BRIDGE IS NOT NECESSARY . . . please verify. Thanks.

Also what size bios of the 4979.67 did you use? 256k or 1024? I think it's the 256k...

I'm just now getting into TSOP flashing . . . I've installed a bunch of chips, but most of my friends don't do Xbox Live and so don't really need a chip.

So far I've done only one TSOP flash using the mechassault saved game tactic on a v1.0 box. Word.

disaster · « **Reply #21 on:** December 27, 2003, 12:57:00 PM »

QUOTE (theman32 @ Dec 25 2003, 11:32 PM)

Wouldn't the defroster repair kit paint be more of a permanent solution?

?

the paint scrapes off really easily if you want to remove it afterwords. I left it on for future convenience myself.

theman32 · « **Reply #22 on:** December 27, 2003, 04:35:00 PM »

Flashed tsop with x2 bios 4979 256k, v1.4 xbox

both 1.4 and 1.5 only two points are necessary, see inside this subject thread previously someone posted the pic that you have to solder only two bridges.

theman32

Unregistered007 · « **Reply #23 on:** December 28, 2003, 01:29:00 PM »

I flashed a V1.4 Today, it had an ST Chip. I solder all the point, the TOP and Bottom, they are easy so I din't care.

Anyways, I flashed it with

Xecuter II - 4977 - 256 Kb BIOS

....I feel so stupid now.... Anyways an Xecuter 2.3 Lite Chip is on its way for another friend, I hope that can solve this guy's Problem.

ftothe3 · « **Reply #24 on:** December 28, 2003, 02:19:00 PM »

yes x2 4979 can be used for v1.4-1.5 that or evox m7. oh and they are supposed to be 256k in size for 1.4-1.5

darkJester · « **Reply #25 on:** December 28, 2003, 04:02:00 PM »

QUOTE (ftothe3 @ Dec 28 2003, 06:19 PM)

yes x2 4979 can be used for v1.4-1.5 that or evox m7. oh and they are supposed to be 256k in size for 1.4-1.5

Cool, thanks for the reply! Does anyone know if I'll be able to put a cloned larger HDD into the XBox after the TSOP flash? I'm thinking of cloning my friend's XBox HDD (using bit-for-bit copy with something like Norton Ghost) and then slapping that into my XBox after the TSOP flash. That HDD uses the EvolutionX dashboard, FWIW. Does that sound like something that can actually work?

socrates · « **Reply #26 on:** December 28, 2003, 04:17:00 PM »

K yes you can put in a larger drive but i dont think you can clone your friends drive and use it in your xbox.....im not 100% on this, if some one else knows please let us know for sure.

Author Topic: V1.4 Or V1.5 Tsop Flash (Read 328 times)