Topic: Needs Help Falshing The "winbond - W49f020t" (Read 271 times)

RoboChicken · « **Reply #15 on:** December 25, 2003, 01:13:00 AM »

QUOTE (sadissad @ Dec 24 2003, 06:59 AM)

this is what i did but i couldn't succeed
i did hot swap the hdd and download the 007raincoat0501 in udata,,
solder the two top point and telnet to my xbox ,run raincoat -p bois.bin ,,
( i got UNKNOWN DEVICE read only??? manf=0x09, dev0=00 )
i have bad soldering skills but im sure that they are connected,,any suggest, i will be aprocheated

"bois.bin"? you type "bios.bin" right?

I got the same thing except mine was:

"UNKNOWN DEVICE read only??? manf=da, dev=8c"

Did and redid all three points- was ripping my hair out.

All I did was update to raincoat .501 and it flashed! And left out the 0x900 from my conf too.

PsiDOC · « **Reply #16 on:** December 25, 2003, 02:02:00 AM »

QUOTE

UNKNOWN DEVICE read only??? manf=da, dev=8c

That is the correct reply ID from the TSOP. The TSOP ID was not entered in the raincoat /etc/raincoat.conf file.
That's why upgrading to 5.01 worked it's in there already.

RoboChicken · « **Reply #17 on:** December 25, 2003, 02:07:00 AM »

QUOTE (PsiDOC @ Dec 25 2003, 12:02 PM)

QUOTE

UNKNOWN DEVICE read only??? manf=da, dev=8c

That is the correct reply ID from the TSOP. The TSOP ID was not entered in the raincoat /etc/raincoat.conf file.
That's why upgrading to 5.01 worked it's in there already.

That's the wierd thing- originally I only updated the raincoat.conf to the one from .501 and not raincoat itself and it didn't work. It started working when I updated the raincoat file itself (449k in size - the one I had originally was a little smaller).

kiltwearingpoet · « **Reply #18 on:** December 25, 2003, 05:22:00 AM »

Damn, I didn't want to use the raincoat, even though I'm a linux user myself. The Evox is SOO much easier. Ahh perhaps the older i get the less love of the command line I have, (mmmmm dos...) Yea that is the id that i am getting from the board too. DA 8C. Oh well, time to raincoat the sucker.

PsiDOC · « **Reply #19 on:** December 25, 2003, 11:07:00 AM »

QUOTE (RoboChicken @ Dec 25 2003, 01:07 PM)

QUOTE (PsiDOC @ Dec 25 2003, 12:02 PM)

QUOTE

UNKNOWN DEVICE read only??? manf=da, dev=8c

That is the correct reply ID from the TSOP. The TSOP ID was not entered in the raincoat /etc/raincoat.conf file.
That's why upgrading to 5.01 worked it's in there already.

That's the wierd thing- originally I only updated the raincoat.conf to the one from .501 and not raincoat itself and it didn't work. It started working when I updated the raincoat file itself (449k in size - the one I had originally was a little smaller).

Yep.
Thank my fellow countryman Exobex for fixing the error on the Raincoat 0.5 file for you.
That's why it worked!!
Regards,
Psi

sadissad · « **Reply #20 on:** December 25, 2003, 07:43:00 PM »

finally, I used Conductive Pen, connected all there points.......everything went perfect ,,
thanks to you guys..you were alots of help.
Saeed

Author Topic: Needs Help Falshing The "winbond - W49f020t" (Read 271 times)