xboxscene.org forums

Author Topic: 1.0 Tsop Flash Problem  (Read 65 times)

delquar

  • Archived User
  • Newbie
  • *
  • Posts: 5
1.0 Tsop Flash Problem
« on: November 24, 2003, 04:53:00 AM »

i cant tell exactly on the picture of the bottom side of the mo-bo to solder. anyone have a better version, or could just tell me.. it would be greatly appreciated
Logged

Zedek

  • Archived User
  • Full Member
  • *
  • Posts: 198
1.0 Tsop Flash Problem
« Reply #1 on: November 24, 2003, 05:13:00 AM »

It's those two little bumps to the right and underneath the silkscreen mark of R7R3

Just find that location point and then look for the two little silver bumps.  That's the jumper point.
Logged

Dubber

  • Archived User
  • Newbie
  • *
  • Posts: 26
1.0 Tsop Flash Problem
« Reply #2 on: November 24, 2003, 05:16:00 AM »

notice the location of the LPC bus in the picture.  that should help you locate points.
Logged

delquar

  • Archived User
  • Newbie
  • *
  • Posts: 5
1.0 Tsop Flash Problem
« Reply #3 on: November 24, 2003, 05:24:00 AM »

i can find the points, but i dont know what ones i am supposed to connect
Logged

Zedek

  • Archived User
  • Full Member
  • *
  • Posts: 198
1.0 Tsop Flash Problem
« Reply #4 on: November 24, 2003, 05:53:00 AM »

you connect those two little bumps.....

take a very small amount of solder and just connect those two little bumps..that's it ;)
Logged

lordvader129

  • Archived User
  • Hero Member
  • *
  • Posts: 5860
1.0 Tsop Flash Problem
« Reply #5 on: November 24, 2003, 07:19:00 AM »

just look for 2 really shiny quare silver bumps, there are no other points that look like them

they may also be under the little black sticker/pad thing
Logged

delquar

  • Archived User
  • Newbie
  • *
  • Posts: 5
1.0 Tsop Flash Problem
« Reply #6 on: November 24, 2003, 02:18:00 PM »

well i did that, but it still isn't being happy with it. i will try some other methods of pregramming it for a bit then
Logged