i flashed a v.1.4/1.5 tsop using the 2 solder points on the top of the board and one on the bottom.. i used the 007auf exploit to flash the tsop. but the tsop would not flash.. so i loaded up the 007raincoat to flash the bios.. i telnet into the xbox like i usually do and flash the bios with the 4977, flash verified.then i reboot. To my suprise i get flashing greenlights and it shuts off. So right now i know i have a either Bad flash or some major problems. Apon trouble shooting i realize that the 4977 bios is not compatible with the 1.4/1.5 xbox's. Then i thought about fixing a bad flash like i would do on a older version xbox with a matrix. no luck (old chips dont support lframe). So my question is this, How can i possibly fix this bad flash. I hav thought of getting a newer modchip, flashing it with m7.. solder it into place..boot the xbox via chip. and since the bios is cached then disable the modchip load 007 and run the 007raincoat that is still on the factory hd in the xbox and telnet in and reflash to m7.. anyone else have this problem or know a solution to my disasster.. i have been up for 2 days messing with this thing and 1 thing i dont need is another big ole' paperweight in my house.. PLEASE HELP!!