xboxscene.org forums

Author Topic: Boot W/chip, Remove Chip, Then Flash Tsop?  (Read 58 times)

KDragon

  • Archived User
  • Full Member
  • *
  • Posts: 138
Boot W/chip, Remove Chip, Then Flash Tsop?
« on: August 17, 2003, 08:26:00 AM »
tongue.gif
Logged

shoup

  • Archived User
  • Jr. Member
  • *
  • Posts: 54
Boot W/chip, Remove Chip, Then Flash Tsop?
« Reply #1 on: August 17, 2003, 08:36:00 AM »
i also was wondering about this....
Logged

msn25

  • Archived User
  • Full Member
  • *
  • Posts: 212
Boot W/chip, Remove Chip, Then Flash Tsop?
« Reply #2 on: August 17, 2003, 08:44:00 AM »
yall JUST TRY IT...

...thats the best i can offer...i dont see why it wouldnt work...

...thats how u HOT SWAP FLASH...so...POSSIBLY?!?!
Logged

KDragon

  • Archived User
  • Full Member
  • *
  • Posts: 138
Boot W/chip, Remove Chip, Then Flash Tsop?
« Reply #3 on: August 17, 2003, 08:50:00 AM »
mad.gif
Logged

KDragon

  • Archived User
  • Full Member
  • *
  • Posts: 138
Boot W/chip, Remove Chip, Then Flash Tsop?
« Reply #4 on: August 17, 2003, 08:52:00 AM »
wink.gif
but pointles jester.gif
Logged

rzyzzy

  • Archived User
  • Sr. Member
  • *
  • Posts: 271
Boot W/chip, Remove Chip, Then Flash Tsop?
« Reply #5 on: August 17, 2003, 08:52:00 AM »
feel free to try it, but it won't work.  Cheapmods boot off the lpc bus - when you boot off that bus, you disable the regular bus ( that your tsop is on) - you can "hot swap" cheapmods because they are on the same bus.  You can't switch busses after booting with a cheapmod.  

Logged

Noilegnave Siseneg Noen

  • Archived User
  • Full Member
  • *
  • Posts: 110
Boot W/chip, Remove Chip, Then Flash Tsop?
« Reply #6 on: August 20, 2003, 01:28:00 PM »
doesn't the Phoenix BIOS Loader allow you to flash your TSOP?  If so, that would be a simple way to do it.  and even easier than that, you could always use the 007 exploit evox dash, which is super-easy if you're already modded or have access to a modded box and a memcard.  This definitely works, and no removing of phoenix stuff afterward necessary.  

I tried doing this too, booting from matrix chip and then removing and flashing TSOP, to no avail.  didn't really know why it wouldn't work, thought my soldering was bad.  but it's a real piece of cake to just use a tried and true method like 007, it succeeded and showed me my soldering was at least adequate.
Logged