xboxscene.org forums

Author Topic: Raincoat Help.. Look Plz.  (Read 114 times)

a9h3x

  • Archived User
  • Jr. Member
  • *
  • Posts: 75
Raincoat Help.. Look Plz.
« on: August 02, 2003, 09:00:00 PM »
I get this when i try to flash my v1.2....

# ./raincoat -p bios.bin
raincoat Flasher 0.501 Apr 14 2003  [email protected]
Reading in ./raincoat.conf... 20 flash types read

UNKNOWN DEVICE Read Only??? manf=0x09, dev=0x00
Try adding the device ID to your raincoat.conf
#
I have raincoat .51...
and my raincoat.cfg is this....
Flash = 0x01d5,"AMD - Am29F080B",0x100000
Flash = 0x04d5,"FUJITSU - MBM29F080A",0x100000
Flash = 0xadd5,"Hynix - HY29F080",0x100000
Flash = 0x20f1,"ST - M29F080A",0x100000
Flash = 0xbf61,"SST - 49LF020",0x40000
Flash = 0x378c,"AMIC - A29002",0x40000
Flash = 0x01d5,"AMD - Am29F080B",0x100000
Flash = 0x04d5,"FUJITSU - MBM29F080A",0x100000
Flash = 0xadd5,"Hynix - HY29F080",0x100000
Flash = 0x20f1,"ST - M29F080A",0x100000
Flash = 0xbf61,"SST SST49LF020",0x40000
Flash = 0x89a6,"Sharp LHF08CH1",0x100000
Flash = 0xda8c,"Winbond W49F020",0x40000
Flash = 0x01a4,"AMD - Am29F040B",0x80000
Flash = 0xda0b,"Winbond - W49F002U",0x40000
Flash = 0xc236,"MACRONIX - MX29F022NTPC",0x40000
Flash = 0x20b0,"ST M29f002BT",0x40000
Flash = 0x01da,"AMD - Am29LV800B - Xodus/Chameleon 4x256",0x100000
Flash = 0x20B0,"ST 29F002",0x40000
Flash = 0xadb0,"Hynix - HY29F002",0x40000
Flash = 0x015b,"AMD - Am29LV800B",0x100000

any ideas?
Logged

a9h3x

  • Archived User
  • Jr. Member
  • *
  • Posts: 75
Raincoat Help.. Look Plz.
« Reply #1 on: August 02, 2003, 09:49:00 PM »
but they are... lol i have both on top perfect.. but the one on bottom the trace is lifted i didnt think it was gonna work but... wouldnt it atleasy recognise the chip....
Logged

Technoside2

  • Archived User
  • Newbie
  • *
  • Posts: 9
Raincoat Help.. Look Plz.
« Reply #2 on: August 02, 2003, 09:53:00 PM »
trust me man go back and check them I promise that's what it is, put more solder on there if you have to, like put some on the tip of gun and dab it on there, I went throught the same thing!!
Logged

a9h3x

  • Archived User
  • Jr. Member
  • *
  • Posts: 75
Raincoat Help.. Look Plz.
« Reply #3 on: August 02, 2003, 09:54:00 PM »
so the trace lifted on the bottom doesn't matter?
Logged

smokeingit

  • Archived User
  • Hero Member
  • *
  • Posts: 588
Raincoat Help.. Look Plz.
« Reply #4 on: August 02, 2003, 10:04:00 PM »
QUOTE (a9h3x @ Aug 2 2003, 10:54 PM)
so the trace lifted on the bottom doesn't matter?

a.... yeah! if its lifted and not getting contact then its no good. make sure you fix the bottom point then try again.
Logged

a9h3x

  • Archived User
  • Jr. Member
  • *
  • Posts: 75
Raincoat Help.. Look Plz.
« Reply #5 on: August 02, 2003, 10:23:00 PM »
QUOTE (smokeingit @ Aug 3 2003, 07:04 AM)
QUOTE (a9h3x @ Aug 2 2003, 10:54 PM)
so the trace lifted on the bottom doesn't matter?

a.... yeah! if its lifted and not getting contact then its no good. make sure you fix the bottom point then try again.

yeh i dont have any flux and its not worth my time ill just make a cheapmod ;p
Logged