Topic: Bad Flash With Ver 1.1 Need Tut To Fix Please (Read 100 times)

Rob3121 · « **on:** July 15, 2003, 10:53:00 PM »

What was your BIOS setup (example MS + MS + X2 + X2 or was it a hacked 1MB BIOS)? let me know and i might be able to help ya!

jasonkid · « **Reply #1 on:** July 16, 2003, 12:48:00 PM »

thanks for the reply, my problem was using the wrong size bios i think. i was try to flash the 1mb bio it was hang in about 1/4 of the flash then i turn it off and now it won't boot anymore it only give me black screen some told me to do the multibios method to fix this problem but my question is do i have to remove the messiah-x before doing this or live it on thank you

ice1138 · « **Reply #2 on:** July 16, 2003, 01:05:00 PM »

If you tried to flash the 1Mb TSOP with a 256kb bios then there is still hope for you. all you need to do is connect wires to A18 and A19 and then hold them to the side of the chassis (metal) when you power up. Then make sure the wires are not touching the chassis and flash the bios again.

-ice1138

In case you were sitting there wondering "What and Where the hell is A18 and 19?!" ,look through the multibios tutorials in the tuts section.

jasonkid · « **Reply #3 on:** July 16, 2003, 02:32:00 PM »

thanks you all, sorry for the troubles

Author Topic: Bad Flash With Ver 1.1 Need Tut To Fix Please (Read 100 times)